Basement & foundation waterproofing for apartments in Aldawadmi
In short: Basement & foundation waterproofing for apartments in Aldawadmi starts with the moisture meter for ceilings and walls, then the crack injection (polyurethane or epoxy), before anything is opened. The centre of Aldawadmi sits about 976 m above sea level (SRTM open elevation data). Pricing starts from Crack injection (per metre) (SAR 40–120 per m), and other items are quoted after the visit.
What is specific about Aldawadmi for basement & foundation waterproofing
Main roads in or near Aldawadmi: King Abdulaziz Road, Dawadmi Bujadiyah Road. The centre of Aldawadmi sits about 976 m above sea level (SRTM open elevation data).
Team note on Aldawadmi: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins..
Before anything else, a technician in Aldawadmi checks the lowest level of the building first, because basement and foundation walls are where water is most likely to enter and where the cost of a mistake is highest. The centre of Aldawadmi sits about 976 m above sea level, which means the town is on high ground, but that does not prevent water from collecting around foundations after rain, especially where drainage around the building is poor or where the ground slopes toward the structure. Crack injection is priced at SAR 40–120 per metre, so every visible crack in a basement wall or floor is measured and noted early. Basement waterproofing itself ranges from SAR 50–150 per m², and the choice between approaches depends on what is found during the inspection rather than on a fixed rule.
Several things cannot be settled from a description and are left to the site visit. The technician needs to see the actual condition of the walls, whether the moisture is rising from the floor, seeping through the wall, or coming from a leaking pipe or bathroom above. Bathroom waterproofing, priced at SAR 15–40 per m², is often a separate job, and it is only confirmed once the source is traced. Epoxy coating at SAR 35–90 per m² and spray foam at SAR 20–45 per m² are each suited to different surfaces and moisture levels, so the final method is chosen on site. Roof work is treated the same way: liquid roof waterproofing at SAR 8–25 per m² and bitumen membrane at SAR 15–35 per m² are both possible, and the right one depends on the roof's slope, age and exposure.
To help the technician prepare, it is useful to have the following ready: the floor plan of the basement or affected level, the approximate area of walls and floor in square metres, any previous repair records, and a note of when water is seen most often, such as after heavy rain or during certain seasons. If a water tank is part of the problem, tank internal coating at SAR 25–60 per m² can be quoted once its surface area is known. Insulation boards such as XPS, at SAR 12–30 per m², may also be relevant where the outer wall is accessible. Clear answers to these questions let the technician arrive ready to inspect quickly and give an accurate estimate on the same visit.
In apartment buildings, the floor below is often where a leak shows first.
Signs worth paying attention to
If you notice one of these signs in Aldawadmi, it is a good moment to talk to the team:
- Salt marks at the bottom of the walls
- Damp basement walls
- Water seeping in after rain
Causes we see in the field
- A high groundwater level — we check this before anything else.
- A common cause: rainwater draining towards the foundation.
- Cracks at construction joints — we check this before anything else.
Tools and methods, and when we use them
| Tool | What it finds | When we use it in Aldawadmi |
|---|---|---|
| Roof, falls and drains survey | Ponding areas and the condition of the old layer | Limits: shows the condition, not the material alone |
| Crack injection (polyurethane or epoxy) | Stopping active water through cracks | Limits: treats the crack, not the water source |
| Moisture meter for ceilings and walls | Where water is entering now, from inside | Limits: measures the effect, not the water path |
From the first visit to the report
- Finding the source: Groundwater, rain or a pipe — each needs a different treatment.
- Preparation: Surfaces are cleaned and opened where needed.
- Injection: Active cracks are injected.
- Waterproofing layers: The system is applied on the right side of the wall where possible.
- Follow-up: Readings are repeated after the treatment.
Facts and costs — Aldawadmi
| Item | Value | Source |
|---|---|---|
| District profile | The centre of Aldawadmi sits about 976 m above sea level (SRTM open elevation data) | SRTM (NASA) open data |
| Roads | Main roads in or near Aldawadmi: King Abdulaziz Road, Dawadmi Bujadiyah Road | Kashf data (owner) |
| District profile | Team note on Aldawadmi: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins. | Kashf team |
| Crack injection (per metre) | SAR 40–120 per m | Owner price list (Aldawadmi) |
| Basement waterproofing (per m²) | SAR 50–150 per m² | Owner price list (Aldawadmi) |
Common questions about basement & foundation waterproofing in Aldawadmi
Where does basement & foundation waterproofing for apartments start in Aldawadmi?
We start with finding the source (groundwater, rain or a pipe — each needs a different treatment), then preparation (surfaces are cleaned and opened where needed).
What does basement & foundation waterproofing cost in Aldawadmi?
From our published price list: Crack injection (per metre) SAR 40–120 per m; Basement waterproofing (per m²) SAR 50–150 per m². Quantities are confirmed at the inspection.
What do I receive after the work?
The source, the treatment and the follow-up result, in a technical report that carries a verification code.
Common mistakes we see
- Painting the basement wall while the water comes from outside
What you receive
The written output: the source, the treatment and the follow-up result. The report is numbered and can be checked with its verification code.
Planning the visit in Aldawadmi
- Keep photos of the problem and of any earlier repairs — they help the technician compare before and after.
- If you rent, tell your landlord or building management before the visit and agree in writing who pays; the written report can be shared with them.
- Have access ready to the water meter, the tank hatches, the roof and the main valve; in apartment buildings the roof keys are often with the building guard (haris).
- Prices are in Saudi riyals (SAR); the final price is confirmed after the inspection, before any work starts.
Sources and method
- SRTM (NASA) open data
- Kashf data (owner)
- Kashf team
- Owner price list for Aldawadmi
- Local pages are published only after a quality gate: real local facts, text similarity of no more than 15% with any other English page, and a claims check.
- النسخة العربية