Epoxy coating & waterproofing in Alqunfudhah: cost & published offers
In short: Epoxy coating & waterproofing (cost & published offers) in Alqunfudhah starts with the moisture meter for ceilings and walls, then the thickness measurement at spread-out points, before anything is opened. Alqunfudhah is about 0.4 km from the sea coast (OpenStreetMap). Published price: Epoxy coating (per m²), SAR 35–90 per m²; anything else is quoted after the inspection.
What is specific about Alqunfudhah for epoxy coating & waterproofing
Alqunfudhah is about 0.4 km from the sea coast (OpenStreetMap). The centre of Alqunfudhah sits about 7 m above sea level (SRTM open elevation data).
Team note on Alqunfudhah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins..
Epoxy coating and waterproofing work in Alqunfudhah usually comes up when a floor or wall has begun to fail. The most common problem in this kind of property is moisture working its way through concrete, which can show up as damp patches, peeling paint, or hairline cracks that let water in. Left alone, these faults spread and become more expensive to repair, so early attention matters.
Local conditions shape how the work should be planned. The centre of Alqunfudhah sits about 7 m above sea level, and the town is about 0.4 km from the sea coast. That closeness to the coast means salt-laden air and damp ground can both affect surfaces, so a contractor should check the substrate carefully before choosing a system. Where moisture is rising from below, a basement may need a different approach from a bathroom or a flat roof. Published rates for the main options run from SAR 50–150 per m² for basement waterproofing, SAR 15–40 per m² for bathrooms, and SAR 35–90 per m² for epoxy coating, with liquid roof waterproofing at SAR 8–25 per m² and crack injection at SAR 40–120 per metre.
Before the visit, ask the contractor which surfaces they will measure and whether the quote covers preparation, crack injection, and any repairs to the substrate. Ask what material they propose for your specific area, such as epoxy coating, spray foam, bitumen membrane, or XPS boards, and why it suits your site. Request that the quote be written per m² or per metre so you can compare it with the published ranges. It also helps to ask how they will deal with the coastal damp and whether the work will be inspected once it is finished.
Prices shown on this page come from our own published price list for the city; the final price is set after inspection.
Signs worth paying attention to
These are the signs most often linked to epoxy coating & waterproofing:
- A warehouse floor that is wearing away
- A tank that needs an easy-to-clean surface
- Oil stains on a floor
The most common causes
- A common cause: a damp surface that ruins adhesion.
- Insufficient preparation — we check this before anything else.
Tools and methods, and when we use them
| Method | What it helps with | Its role in Alqunfudhah |
|---|---|---|
| Fill test with level monitoring | Whether a tank coating holds after the work | Limits: takes time to monitor the level |
| Thickness measurement at spread-out points | Whether the thickness in the quote was achieved | Limits: for foam and liquid-applied layers |
| Moisture meter for ceilings and walls | Where water is entering now, from inside | Limits: measures the effect, not the water path |
The steps in order
- Surface moisture reading: Epoxy is applied only when the substrate is dry enough.
- Careful preparation: Grinding and cleaning for adhesion.
- Layers: Primer and body coats as specified.
- Inspection: Thickness and curing are checked.
Facts and costs — Alqunfudhah
| Item | Value | Source |
|---|---|---|
| District profile | The centre of Alqunfudhah sits about 7 m above sea level (SRTM open elevation data) | SRTM (NASA) open data |
| District profile | Alqunfudhah is about 0.4 km from the sea coast (OpenStreetMap) | © OpenStreetMap contributors (ODbL) |
| District profile | Team note on Alqunfudhah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins. | Kashf team |
| Epoxy coating (per m²) | SAR 35–90 per m² | Owner price list (Alqunfudhah) |
Short answers for Alqunfudhah
Where does epoxy coating & waterproofing (cost & published offers) start in Alqunfudhah?
We start with surface moisture reading (epoxy is applied only when the substrate is dry enough), then careful preparation (grinding and cleaning for adhesion).
What does epoxy coating & waterproofing cost in Alqunfudhah?
From our published price list: Epoxy coating (per m²) SAR 35–90 per m². Quantities are confirmed at the inspection.
What do I receive after the work?
The epoxy system, thickness and curing time, in a technical report that carries a verification code.
What we advise against
- Coating over a damp surface
What you receive
You receive: the epoxy system, thickness and curing time, in a technical report with a verification code.
Practical notes for residents of Alqunfudhah
- Keep photos of the problem and of any earlier repairs — they help the technician compare before and after.
- If you rent, tell your landlord or building management before the visit and agree in writing who pays; the written report can be shared with them.
- Have access ready to the water meter, the tank hatches, the roof and the main valve; in apartment buildings the roof keys are often with the building guard (haris).
- Prices are in Saudi riyals (SAR); the final price is confirmed after the inspection, before any work starts.
Sources and method
- SRTM (NASA) open data
- © OpenStreetMap contributors (ODbL)
- Kashf team
- Owner price list for Alqunfudhah
- Local pages are published only after a quality gate: real local facts, text similarity of no more than 15% with any other English page, and a claims check.
- النسخة العربية