Bathroom waterproofing in Alula: for companies (annual contract)

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

What is specific about Alula for bathroom waterproofing

Main roads in or near Alula: King Abdullah Road. The centre of Alula sits about 697 m above sea level (SRTM open elevation data).

Alula sits about 697 m above sea level, and that elevation shapes how we plan bathroom waterproofing for companies on an annual contract. At this height the air is generally drier and the surrounding terrain is open and rocky, so buildings face strong sun, wide daily temperature swings, and wind-driven dust. Our crews therefore check each site for surface movement and sun exposure before any coating goes on, because heat expansion is a common cause of hairline cracks in wet areas.

Each of these features has a direct effect on the work. Because the centre sits at a steady altitude with dry air and heavy sun, we prefer flexible products that tolerate movement, and we schedule application for cooler hours so the coating cures properly. Because surrounding ground is rocky and dusty, we clean substrates thoroughly and repair any cracks before waterproofing, so dust and loose material do not undermine adhesion. Our annual contract rates for bathroom waterproofing run at SAR 15–40 per m², and the price reflects the preparation these conditions demand. Where a site also has crack injection or tank coating needs, we price those separately at SAR 40–120 per metre and SAR 25–60 per m², so the scope stays transparent across the year.

Owners who manage several sites often make the same errors, and our contract structure is designed to avoid them. The first is waiting for visible leaks before booking work, which lets water reach the structure below. The second is applying a coating over dusty or damp surfaces, which causes peeling within months. The third is treating each bathroom as a one-off job rather than planning a yearly inspection cycle. Under an annual agreement we schedule checks, log repairs, and keep records for every unit, so facility managers can see the condition of their properties at a glance and budget with confidence.

For companies, an annual contract sets the scope, the visit schedule and the reports in writing.

Signs worth paying attention to

If you notice one of these signs in Alula, it is a good moment to talk to the team:

• Worn grout
• Damp around the shower
• A stain under the bathroom on the floor below

The most common causes

• The area around the floor drain.
• A damaged floor layer.
• Corners without waterproofing tape — we check this before anything else.

Tools we use in Alula

The steps in order

1. Finding the source: A supply-pipe leak is ruled out first.
2. Preparation: The floor is opened and cleaned where needed.
3. Corners and details: Tape and detailing at corners, drains and pipe entries.
4. Flood test: The floor is tested before tiling.

Quick comparison: facts and costs in Alula

Questions from Alula

What we advise against

• Waterproofing the floor while the supply pipe still leaks

What you receive

The written output: the flood-test result and photos of each stage. The report is numbered and can be checked with its verification code.