Bathroom waterproofing in Alula: cost & published offers

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

What is specific about Alula for bathroom waterproofing

The centre of Alula sits about 697 m above sea level (SRTM open elevation data). Main roads in or near Alula: King Abdullah Road.

An owner in Alula who has noticed damp patches, soft plaster or tiles lifting at the edge of a shower or bathroom floor is usually dealing with water that has crept through a joint or a worn seal rather than a dramatic failure. Many homes here have been built with a mix of stone, block and rendered walls, and bathrooms are often added or refitted over time, so the original waterproofing may be patchy or missing altogether. Owners want to know what the work will cost, whether the quote is fair, and how to avoid paying twice for a fix that does not last.

The published local rates help set expectations. Bathroom waterproofing in Alula is listed at SAR 15–40 per m², which is a useful range for a typical wet room or shower floor. For a bathroom that needs a more demanding finish, epoxy coating is listed at SAR 35–90 per m², while spray foam is listed at SAR 20–45 per m². If the problem is a visible crack in a wall, crack injection is priced at SAR 40–120 per m. Because the centre of Alula sits about 697 m above sea level, owners should also expect that dry, hot conditions and sharp day-night temperature swings can stress sealants, so flexible materials and proper surface preparation matter as much as the product chosen.

A practical sequence keeps the job under control. First, mark exactly where the water appears and check whether it comes from the shower, the floor drain or the wall behind the tiles, because each points to a different repair. Second, ask for quotes that state the area in m² and the material used, and compare them against the published ranges above rather than against a single total. Third, confirm that the surface is cleaned, dried and any cracks are repaired before the membrane goes on. Fourth, agree on how the new layer will be tested, for example by flooding the floor and checking for leaks before tiles are relaid. Finally, keep a written record of the materials and areas treated, so future work on the property starts from a clear starting point.

Prices shown on this page come from our own published price list for the city; the final price is set after inspection.

Signs that call for bathroom waterproofing

If you notice one of these signs in Alula, it is a good moment to talk to the team:

• Worn grout
• A stain under the bathroom on the floor below
• Damp around the shower

Causes we see in the field

• The area around the floor drain.
• A common cause: corners without waterproofing tape.
• A damaged floor layer.

Tools we use in Alula

From the first visit to the report

1. Finding the source: A supply-pipe leak is ruled out first.
2. Preparation: The floor is opened and cleaned where needed.
3. Corners and details: Tape and detailing at corners, drains and pipe entries.
4. Flood test: The floor is tested before tiling.

Facts and costs — Alula

Common questions about bathroom waterproofing in Alula

Mistakes that cost more

• Waterproofing the floor while the supply pipe still leaks

What you receive

The written output: the flood-test result and photos of each stage. The report is numbered and can be checked with its verification code.