Water tank waterproofing for clinics in Baqiq

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

Before we start: what we know about Baqiq

Main roads in or near Baqiq: King Fahd Road. The centre of Baqiq sits about 83 m above sea level (SRTM open elevation data).

Team note on Baqiq: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins..

Is it worth waterproofing the water tank at a clinic in Baqiq, and what will it cost? A property owner here would reasonably ask this before committing budget, and the answer depends on the tank's condition and the surfaces involved. Baqiq's town centre sits about 83 m above sea level, a fact worth noting when planning access and drainage around a site. For a tank, the relevant costs are set per square metre: tank internal coating runs SAR 25–60 per m², and epoxy coating runs SAR 35–90 per m². Where cracks are the problem rather than the surface, crack injection is priced at SAR 40–120 per metre, so a short, targeted repair may cost far less than recoating the whole interior.

The inspection starts with a walk-through of the tank interior and exterior, looking for cracks, flaking coatings, staining and any active seepage. The technician measures the affected surface areas so the quote can be calculated per square metre, and marks every crack so its length can be priced per metre. Where water is entering through the walls or floor, the tank's edges and joints are checked closely, since these are the usual leak points. Depending on what the inspection shows, the recommendation may be a full internal coating, localised crack injection, or a combination of both. The outcome is a written scope that separates the repair work from any optional coating, so the clinic can decide with clear figures in front of it.

Before the visit, the clinic should empty or lower the tank as far as practical so the interior surfaces can be seen and dried for treatment. Gather any previous maintenance records, the tank's age, and notes on when leaks were first noticed or whether they worsen after rain or heavy use. Clear access to the tank and its roof or manhole, and confirm who will be on site to answer questions about water supply interruptions. Having this information ready helps the inspection finish in one visit and lets the quote reflect the real condition of the tank rather than estimates.

For clinics, work is scheduled around patient hours and kept to the areas that need it.

Signs worth paying attention to

If you notice one of these signs in Baqiq, it is a good moment to talk to the team:

• Deposits and flaking inside the tank
• A tank that leaks after testing
• Unusual colour or taste in the water

Where the problem usually comes from

• Cracks in the walls or floor.
• Damaged old coating — we check this before anything else.
• Construction joints — we check this before anything else.

How we choose the tool in Baqiq

How the work is done, step by step

1. Emptying and ventilation: The tank is emptied and ventilated before entry.
2. Cleaning and preparation: Loose material is removed down to a sound surface.
3. Crack treatment: Active cracks are treated first.
4. Coating layers: A material intended for drinking-water tanks is applied.
5. Disinfection and fill test: The tank is disinfected and the level is monitored after filling.

Baqiq in facts and sources

Common questions about water tank waterproofing in Baqiq

Mistakes that cost more

• Using a material that is not intended for drinking water

What you receive

You receive: the material name, its batch number and the fill-test result, in a technical report with a verification code.