Roof waterproofing for rest houses & farms in Buraydah

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

Before we start: what we know about Buraydah

Team note on Buraydah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins.. The centre of Buraydah sits about 606 m above sea level (SRTM open elevation data).

Does a rest house or farm roof in Buraydah need waterproofing, and what will it cost? Buraydah's centre sits about 606 m above sea level, and for owners of rest houses and farms that altitude is one reason roofs are worth checking regularly. Roof work is priced per square metre, and the figures we work from are a liquid roof waterproofing range of SAR 10–25 per m², a bitumen membrane range of SAR 15–35 per m², and XPS boards at SAR 10–30 per m². Crack injection, which is often needed where a roof has split, is priced per metre at SAR 40–115 per m. Knowing these ranges lets you compare options before any work starts.

Our inspection starts at the roof surface and works inward. The technician walks the full area to look for cracks, lifted edges, ponding water and worn sealant around fixtures, then marks each defect so it can be measured. Where cracks are present, the length is recorded in metres so the crack injection estimate matches what is actually there. The surface is then assessed for the coating or membrane best suited to its condition, and the findings are written up so you can see which areas need repair and which can be left alone. For farm buildings with water tanks on the roof, the tank interior is checked too, since tank internal coating is priced separately at SAR 25–55 per m².

Before the visit, clear access to the roof and remove any loose items stored on it, so the technician can work safely and see the full surface. Note any past leaks, the rooms where stains have appeared and the dates you noticed them, because this history helps pinpoint the source. If the property has a water tank, make sure it is accessible and, if possible, empty it for inspection. Having the building's plans or a rough sketch of the roof area also speeds up measurement. With these details ready, the inspection can move straight to finding the problem and pricing the fix.

Rest houses and farms often have long buried lines, tanks and irrigation that need separate tests.

Signs worth paying attention to

If you notice one of these signs in Buraydah, it is a good moment to talk to the team:

• The old waterproofing is cracking
• Water pooling on the roof
• Stains on the top-floor ceiling after rain

Causes we see in the field

• A common cause: cracks in the roof slab.
• Wrong falls towards the drains — we check this before anything else.
• A common cause: damaged waterproofing around tank and AC bases.

How we choose the tool in Buraydah

The steps in order

1. Survey: Falls, drains and the condition of the old layer are recorded.
2. Preparation: Cleaning and repairs before any new layer.
3. Primer: The base coat that the system needs.
4. Waterproofing layers and details: Corners, upstands and bases get their own detail.
5. Flood test: The roof is flooded and checked before it is covered.

Facts and costs — Buraydah

Common questions about roof waterproofing in Buraydah

Common mistakes we see

• Ignoring the tank bases
• Covering the waterproofing before the flood test

What you receive

You receive: a quality record with photos and the flood-test result, in a technical report with a verification code.