Epoxy coating & waterproofing for hotels & serviced apartments in Jeddah
In short: Epoxy coating & waterproofing for hotels & serviced apartments in Jeddah starts with the moisture meter for ceilings and walls, then the thickness measurement at spread-out points, before anything is opened. Jeddah is about 2 km from the sea coast (OpenStreetMap). Pricing starts from Epoxy coating (per m²) (SAR 35–95 per m²), and other items are quoted after the visit.
Why epoxy coating & waterproofing differs in Jeddah
Jeddah is about 2 km from the sea coast (OpenStreetMap). The centre of Jeddah sits about 15 m above sea level (SRTM open elevation data).
Team note on Jeddah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins..
Jeddah sits on the Red Sea coast, and the centre of the city lies about 15 m above sea level, while the sea itself is roughly 2 km away. That combination matters for a hotel or serviced apartment building. The ground is low enough that water and humidity travel inland, yet the site is not so close to the shore that every structure faces constant spray. Most of the moisture that concerns us comes from rainfall runoff, groundwater and the salty, humid air that settles on rooftops and lower walls, so protective coatings need to resist both water pressure and salt-laden air.
Because of this, the service is planned around the parts of a building that take the most punishment. Basement waterproofing typically falls in the range of SAR 55–160 per m², and it is the first priority in buildings with underground levels, since groundwater pressure is constant. Bathroom waterproofing, at SAR 15–40 per m², protects guest rooms and staff facilities from seepage behind tiles. Epoxy coating, priced at SAR 35–95 per m², suits service areas, kitchens and car parks where hard-wearing, easy-clean surfaces are needed. Crack injection, at SAR 40–125 per metre, seals cracks before they widen and let in water, while liquid roof waterproofing at SAR 10–25 per m² and bitumen membrane at SAR 15–35 per m² protect roofs from sun and rain. Tank internal coating, from SAR 25–65 per m², keeps water storage clean and sound, and XPS boards at SAR 15–30 per m² add insulation where it is needed.
Owners of hotels and serviced apartments avoid several common mistakes. They do not postpone repairs to a small crack, because water entering through it can spread behind finishes. They do not choose the cheapest option for a basement or tank where the price range is wide, since the lowest figure rarely reflects the preparation the surface needs. They avoid coating over damp or dirty surfaces, which causes coatings to peel. They also avoid treating roofs and bathrooms as separate issues, when a leak from one often shows up in the other. Planning the work by area, and matching each material to its exposure, keeps guests comfortable and the property running without unplanned closures.
For hotels and serviced apartments, rooms are handled in batches to keep units available.
Signs that call for epoxy coating & waterproofing
These are the signs most often linked to epoxy coating & waterproofing:
- A warehouse floor that is wearing away
- A tank that needs an easy-to-clean surface
- Oil stains on a floor
The most common causes
- A damp surface that ruins adhesion — we check this before anything else.
- Insufficient preparation.
How we choose the tool in Jeddah
| Method | What it helps with | Its role in Jeddah |
|---|---|---|
| Fill test with level monitoring | Whether a tank coating holds after the work | Limits: takes time to monitor the level |
| Thickness measurement at spread-out points | Whether the thickness in the quote was achieved | Limits: for foam and liquid-applied layers |
| Moisture meter for ceilings and walls | Where water is entering now, from inside | Limits: measures the effect, not the water path |
From the first visit to the report
- Surface moisture reading: Epoxy is applied only when the substrate is dry enough.
- Careful preparation: Grinding and cleaning for adhesion.
- Layers: Primer and body coats as specified.
- Inspection: Thickness and curing are checked.
Facts and costs — Jeddah
| Item | Value | Source |
|---|---|---|
| District profile | The centre of Jeddah sits about 15 m above sea level (SRTM open elevation data) | SRTM (NASA) open data |
| District profile | Jeddah is about 2 km from the sea coast (OpenStreetMap) | © OpenStreetMap contributors (ODbL) |
| District profile | Team note on Jeddah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins. | Kashf team |
| Epoxy coating (per m²) | SAR 35–95 per m² | Owner price list (Jeddah) |
Questions from Jeddah
Can I use household chemicals instead of calling a technician?
Using unsuitable chemicals may corrode pipes and does not fix the root cause of the blockage, so it is better to rely on a specialist technician.
What is the difference between foam insulation and other types of insulation?
Foam insulation is easy to apply on uneven surfaces and forms one continuous layer with no joints, while other types, such as bitumen rolls, need the joints to be welded. The contractor decides which is most suitable after inspecting the site.
Can thermal insulation be applied to an existing building?
Yes, thermal insulation can be installed on the roofs and walls of existing buildings without the need for major structural modifications. The contractor prepares the surface, then applies the insulating material and the protective layer over it.
Where does epoxy coating & waterproofing for hotels & serviced apartments start in Jeddah?
We start with surface moisture reading (epoxy is applied only when the substrate is dry enough), then careful preparation (grinding and cleaning for adhesion).
What does epoxy coating & waterproofing cost in Jeddah?
From our published price list: Epoxy coating (per m²) SAR 35–95 per m². Quantities are confirmed at the inspection.
What do I receive after the work?
The epoxy system, thickness and curing time, in a technical report that carries a verification code.
What we advise against
- Coating over a damp surface
What you receive
You receive: the epoxy system, thickness and curing time, in a technical report with a verification code.
Practical notes for residents of Jeddah
- If you rent, tell your landlord or building management before the visit and agree in writing who pays; the written report can be shared with them.
- Keep photos of the problem and of any earlier repairs — they help the technician compare before and after.
- Prices are in Saudi riyals (SAR); the final price is confirmed after the inspection, before any work starts.
- Have access ready to the water meter, the tank hatches, the roof and the main valve; in apartment buildings the roof keys are often with the building guard (haris).
Sources and method
- SRTM (NASA) open data
- © OpenStreetMap contributors (ODbL)
- Kashf team
- Customer questions (reviewed)
- Owner price list for Jeddah
- Local pages are published only after a quality gate: real local facts, text similarity of no more than 15% with any other English page, and a claims check.
- النسخة العربية