Epoxy coating & waterproofing in Madinah: cost & published offers
الخلاصة: In short: In Madinah (Madinah), epoxy coating & waterproofing (cost & published offers) begins with the moisture meter for ceilings and walls and the thickness measurement at spread-out points; nothing is opened until the position is clear. The centre of Madinah sits about 589 m above sea level (SRTM open elevation data).
Epoxy coating & waterproofing in Madinah: the local context
Team note on Madinah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins.. The centre of Madinah sits about 589 m above sea level (SRTM open elevation data).
An owner of a older villa in Madinah notices a damp patch spreading across the basement wall after a wet season, or a tiled bathroom floor that has started to lift at the edges. The property may be a family house with a rooftop water tank, a small garage, or a ground-floor flat in a multi-storey block. Each of these spaces faces its own moisture pressures, and the owner wants to know what work is needed and roughly what the published rates suggest before calling anyone in.
The local setting matters here. The centre of Madinah sits about 589 m above sea level, which places the city on a high plateau rather than near the coast, so owners should not assume that every leak comes from sea air or flooding. Moisture usually travels through cracks, poorly sealed joints and worn surfaces. Published rates vary widely by method: basement waterproofing runs from SAR 50–150 per m², bathroom waterproofing from SAR 15–40 per m², and epoxy coating from SAR 35–90 per m². Liquid roof waterproofing is listed at SAR 10–25 per m², bitumen membrane at SAR 15–35 per m², and XPS boards at SAR 10–30 per m². For a tank, internal coating sits at SAR 25–60 per m², while crack injection is priced per metre at SAR 40–120 per m. These ranges show that the treatment chosen should match the surface and the problem, not simply the lowest figure.
Practical steps help keep the work sensible. First, identify exactly where water enters: walk the basement, check bathroom edges, inspect the roof and look inside the tank. Second, measure the affected areas in square metres and note any cracks in metres, so quotes can be compared on the same basis. Third, decide which surfaces need a flexible layer such as liquid roof membrane or bitumen, and which need a hard, chemically resistant finish such as epoxy coating inside a tank or on a floor. Fourth, ask each provider to state the method, the surface preparation, and the coverage per m² in writing. Finally, plan the work so that cracks are injected before coatings are applied, and allow each layer to cure fully before the space is used again.
Prices shown on this page come from our own published price list for the city; the final price is set after inspection.
Signs worth paying attention to
If you notice one of these signs in Madinah, it is a good moment to talk to the team:
- Oil stains on a floor
- A warehouse floor that is wearing away
- A tank that needs an easy-to-clean surface
The most common causes
- A common cause: a damp surface that ruins adhesion.
- A common cause: insufficient preparation.
How we choose the tool in Madinah
| Tool or method | What it measures | Why it is chosen here |
|---|---|---|
| Thickness measurement at spread-out points | Whether the thickness in the quote was achieved | Limits: for foam and liquid-applied layers |
| Moisture meter for ceilings and walls | Where water is entering now, from inside | Limits: measures the effect, not the water path |
| Fill test with level monitoring | Whether a tank coating holds after the work | Limits: takes time to monitor the level |
How the work is done, step by step
- Surface moisture reading: Epoxy is applied only when the substrate is dry enough.
- Careful preparation: Grinding and cleaning for adhesion.
- Layers: Primer and body coats as specified.
- Inspection: Thickness and curing are checked.
Facts and costs — Madinah
| Item | Value | Source |
|---|---|---|
| District profile | The centre of Madinah sits about 589 m above sea level (SRTM open elevation data) | SRTM (NASA) open data |
| District profile | Team note on Madinah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins. | Kashf team |
| Epoxy coating (per m²) | SAR 35–90 per m² | Owner price list (Madinah) |
Common questions about epoxy coating & waterproofing in Madinah
What is the difference between standard spraying and integrated pest management?
Standard spraying treats visible symptoms only, while integrated pest management includes diagnosis, sealing entry points, and multiple methods for longer-lasting results.
Could the leak be caused by weak waterproofing rather than the pipes?
Yes, damage to the waterproofing layer beneath the bathroom floor is one of the most common causes of leaks, especially in older buildings. In this case, water seeps through the tile joints into the screed and then down to the ceiling below. A specialized inspection can distinguish this from a pipe leak.
What is the difference between drain unblocking and drain cleaning?
Unblocking removes an existing blockage that prevents drainage, while cleaning is a preventive procedure that removes deposits and grease from pipes before they cause a blockage.
What is the first step of epoxy coating & waterproofing (cost & published offers)?
We start with surface moisture reading (epoxy is applied only when the substrate is dry enough), then careful preparation (grinding and cleaning for adhesion).
How much does epoxy coating & waterproofing cost in Madinah?
From our published price list: Epoxy coating (per m²) SAR 35–90 per m². Quantities are confirmed at the inspection.
What do I get at the end?
The epoxy system, thickness and curing time, in a technical report that carries a verification code.
What we advise against
- Coating over a damp surface
What you get after the work
The written output: the epoxy system, thickness and curing time. The report is numbered and can be checked with its verification code.
Practical notes for residents of Madinah
- The Saudi weekend is Friday and Saturday; mention your preferred day and time when booking.
- You can message us on WhatsApp in English; the booking details are sent back to you in the chat to confirm before the visit.
- If you rent, tell your landlord or building management before the visit and agree in writing who pays; the written report can be shared with them.
- Keep photos of the problem and of any earlier repairs — they help the technician compare before and after.
Sources and method
- SRTM (NASA) open data
- Kashf team
- Customer questions (reviewed)
- Owner price list for Madinah
- Local pages are published only after a quality gate: real local facts, text similarity of no more than 15% with any other English page, and a claims check.
- النسخة العربية