Epoxy coating & waterproofing in Makkah: when to call a technician
الخلاصة: In short: In Makkah (Makkah), epoxy coating & waterproofing (when to call a technician) begins with the moisture meter for ceilings and walls and the thickness measurement at spread-out points; nothing is opened until the position is clear. The centre of Makkah sits about 301 m above sea level (SRTM open elevation data).
Why epoxy coating & waterproofing differs in Makkah
The centre of Makkah sits about 301 m above sea level (SRTM open elevation data). Team note on Makkah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins..
Imagine a family who own a three-storey house in the older part of Makkah. The ground floor has a storage room that floods after heavy rain, the owner has noticed hairline cracks in the basement wall, and the bathroom tiles on the upper floor have started to lift near the shower. They are unsure whether this calls for a quick patch or a full coating job, and they want to avoid paying for work that will not last.
The centre of Makkah sits about 301 m above sea level, which matters less for elevation itself than for how water behaves on a sloping, densely built site. Rain runs off hard surfaces quickly and pools wherever drainage is poor, so basements, rooftops and the base of walls take the pressure. For this reason, a technician should first look at where water actually enters before recommending a product. Costs also vary widely by task, so it helps to understand the typical ranges before the visit: basement waterproofing runs SAR 55–160 per m², bathroom waterproofing SAR 15–40 per m², epoxy coating SAR 35–95 per m², and crack injection SAR 40–125 per m. Liquid roof waterproofing sits at SAR 10–25 per m², while a bitumen membrane costs SAR 15–35 per m².
Start by noting where the problem appears: a damp basement wall, a leaking tank, a cracked floor or a wet roof each point to a different solution. Next, call a technician before the rainy season and ask them to inspect the surface and measure the affected area so you receive a per-square-metre quote. Ask whether crack injection should come before the coating, since sealing the cracks first usually prevents the water from returning. Compare the options the technician proposes, such as spray foam at SAR 25–35 per m², XPS boards at SAR 15–30 per m², or tank internal coating at SAR 25–65 per m². Finally, agree on the work in writing, confirm the surface preparation steps, and schedule a follow-up check after the first heavy rain.
Some signs can be watched for a few days; others need a technician straight away — the signs list above helps you decide.
When do you need epoxy coating & waterproofing?
The following signs are worth checking before they grow:
- A tank that needs an easy-to-clean surface
- A warehouse floor that is wearing away
- Oil stains on a floor
The most common causes
- A common cause: insufficient preparation.
- A damp surface that ruins adhesion.
How we choose the tool in Makkah
| Method | What it helps with | Its role in Makkah |
|---|---|---|
| Fill test with level monitoring | Whether a tank coating holds after the work | Limits: takes time to monitor the level |
| Moisture meter for ceilings and walls | Where water is entering now, from inside | Limits: measures the effect, not the water path |
| Thickness measurement at spread-out points | Whether the thickness in the quote was achieved | Limits: for foam and liquid-applied layers |
From the first visit to the report
- Surface moisture reading: Epoxy is applied only when the substrate is dry enough.
- Careful preparation: Grinding and cleaning for adhesion.
- Layers: Primer and body coats as specified.
- Inspection: Thickness and curing are checked.
Makkah in facts and sources
| Item | Value | Source |
|---|---|---|
| District profile | Team note on Makkah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins. | Kashf team |
| District profile | The centre of Makkah sits about 301 m above sea level (SRTM open elevation data) | SRTM (NASA) open data |
| Epoxy coating (per m²) | SAR 35–95 per m² | Owner price list (Makkah) |
Short answers for Makkah
What does finishing work typically include?
It covers plastering, painting, flooring, stone or marble walls, ceilings, gypsum, doors, windows, and final electrical and plumbing installations. You can request full or partial finishing, with the scope clearly defined in the price quote.
Is it possible to renovate the building without evacuating the residents?
In many cases it can be carried out in phases without a full evacuation if the damage is limited. However, for extensive structural renovation, a temporary evacuation may be recommended to ensure safety, and the contractor will explain this in their proposal.
Does waterproofing require removing existing tiles?
It depends on the site condition. Sometimes surface waterproofing can be applied over tiles, while deep leaks require tile removal to treat the layer underneath. A technician will determine the best option after inspection.
What is the first step of epoxy coating & waterproofing (when to call a technician)?
We start with surface moisture reading (epoxy is applied only when the substrate is dry enough), then careful preparation (grinding and cleaning for adhesion).
How much does epoxy coating & waterproofing cost in Makkah?
From our published price list: Epoxy coating (per m²) SAR 35–95 per m². Quantities are confirmed at the inspection.
What do I get at the end?
The epoxy system, thickness and curing time, in a technical report that carries a verification code.
Mistakes that cost more
- Coating over a damp surface
The written outputs
You receive: the epoxy system, thickness and curing time, in a technical report with a verification code.
If you live in Makkah and are new to the area
- Prices are in Saudi riyals (SAR); the final price is confirmed after the inspection, before any work starts.
- Have access ready to the water meter, the tank hatches, the roof and the main valve; in apartment buildings the roof keys are often with the building guard (haris).
- If you rent, tell your landlord or building management before the visit and agree in writing who pays; the written report can be shared with them.
- Keep photos of the problem and of any earlier repairs — they help the technician compare before and after.
Sources and method
- SRTM (NASA) open data
- Kashf team
- Customer questions (reviewed)
- Owner price list for Makkah
- Local pages are published only after a quality gate: real local facts, text similarity of no more than 15% with any other English page, and a claims check.
- النسخة العربية