Epoxy coating & waterproofing in Makkah: without breaking
In short: Epoxy coating & waterproofing (without breaking) in Makkah starts with the moisture meter for ceilings and walls, then the thickness measurement at spread-out points, before anything is opened. The centre of Makkah sits about 301 m above sea level (SRTM open elevation data). Published price: Epoxy coating (per m²), SAR 35–95 per m²; anything else is quoted after the inspection.
Why epoxy coating & waterproofing differs in Makkah
The centre of Makkah sits about 301 m above sea level (SRTM open elevation data). Team note on Makkah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins..
The most common problem with epoxy coating and waterproofing in Makkah is not the coating itself but the surface beneath it. Floors and walls that are damp, dusty, or carrying old paint and salt deposits will not hold an epoxy film, and it will lift or blister within a season. Cracks that are not sealed first let water track through the coating, so the finish looks fine for a while and then fails. Before any product is chosen, the surface needs to be dry, clean, and properly prepared, and the work should not start until that is confirmed.
Makkah's setting shapes how the job is approached. The centre of the city sits about 301 m above sea level, and in a city with this climate, high daytime heat can dry a surface quickly and leave a skin that traps moisture beneath. Crews therefore plan the timing of each coat around the temperature and humidity on site, not just the calendar. Where a basement is involved, the cost of the job depends on the surface and extent: basement waterproofing runs SAR 55–160 per m², bathroom waterproofing SAR 15–40 per m², and epoxy coating SAR 35–95 per m². Crack injection is priced separately at SAR 40–125 per metre, so a property with many cracks will see that line grow quickly. Other options, such as spray foam at SAR 20–45 per m², liquid roof waterproofing at SAR 10–25 per m², bitumen membrane at SAR 15–35 per m², tank internal coating at SAR 25–65 per m², and XPS boards at SAR 15–30 per m², suit different parts of a building, so the right mix depends on where the problem is.
Before the visit, ask what surfaces are included and how the price is measured, whether crack injection is quoted per metre or bundled in, and how the surface will be checked for moisture before coating begins. Ask which product is proposed for each area and why, and what preparation is included in the rate. Confirm how long the crew expects the work to take and whether the area will need to stay closed during curing. A clear written breakdown of each area and its per-unit rate makes it easy to compare quotes and to see exactly what you are paying for.
The aim is to locate the cause with instruments first, so any opening is limited to one point.
Signs that call for epoxy coating & waterproofing
If you notice one of these signs in Makkah, it is a good moment to talk to the team:
- A tank that needs an easy-to-clean surface
- A warehouse floor that is wearing away
- Oil stains on a floor
Causes we see in the field
- Insufficient preparation.
- A damp surface that ruins adhesion.
Tools we use in Makkah
| Tool | What it finds | When we use it in Makkah |
|---|---|---|
| Fill test with level monitoring | Whether a tank coating holds after the work | Limits: takes time to monitor the level |
| Moisture meter for ceilings and walls | Where water is entering now, from inside | Limits: measures the effect, not the water path |
| Thickness measurement at spread-out points | Whether the thickness in the quote was achieved | Limits: for foam and liquid-applied layers |
From the first visit to the report
- Surface moisture reading: Epoxy is applied only when the substrate is dry enough.
- Careful preparation: Grinding and cleaning for adhesion.
- Layers: Primer and body coats as specified.
- Inspection: Thickness and curing are checked.
Makkah in facts and sources
| Item | Value | Source |
|---|---|---|
| District profile | Team note on Makkah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins. | Kashf team |
| District profile | The centre of Makkah sits about 301 m above sea level (SRTM open elevation data) | SRTM (NASA) open data |
| Epoxy coating (per m²) | SAR 35–95 per m² | Owner price list (Makkah) |
Common questions about epoxy coating & waterproofing in Makkah
What does finishing work typically include?
It covers plastering, painting, flooring, stone or marble walls, ceilings, gypsum, doors, windows, and final electrical and plumbing installations. You can request full or partial finishing, with the scope clearly defined in the price quote.
Is it possible to renovate the building without evacuating the residents?
In many cases it can be carried out in phases without a full evacuation if the damage is limited. However, for extensive structural renovation, a temporary evacuation may be recommended to ensure safety, and the contractor will explain this in their proposal.
Does waterproofing require removing existing tiles?
It depends on the site condition. Sometimes surface waterproofing can be applied over tiles, while deep leaks require tile removal to treat the layer underneath. A technician will determine the best option after inspection.
Where does epoxy coating & waterproofing (without breaking) start in Makkah?
We start with surface moisture reading (epoxy is applied only when the substrate is dry enough), then careful preparation (grinding and cleaning for adhesion).
What does epoxy coating & waterproofing cost in Makkah?
From our published price list: Epoxy coating (per m²) SAR 35–95 per m². Quantities are confirmed at the inspection.
What do I receive after the work?
The epoxy system, thickness and curing time, in a technical report that carries a verification code.
What we advise against
- Coating over a damp surface
The written outputs
You receive: the epoxy system, thickness and curing time, in a technical report with a verification code.
Planning the visit in Makkah
- Have access ready to the water meter, the tank hatches, the roof and the main valve; in apartment buildings the roof keys are often with the building guard (haris).
- Prices are in Saudi riyals (SAR); the final price is confirmed after the inspection, before any work starts.
- Keep photos of the problem and of any earlier repairs — they help the technician compare before and after.
- If you rent, tell your landlord or building management before the visit and agree in writing who pays; the written report can be shared with them.
Sources and method
- SRTM (NASA) open data
- Kashf team
- Customer questions (reviewed)
- Owner price list for Makkah
- Local pages are published only after a quality gate: real local facts, text similarity of no more than 15% with any other English page, and a claims check.
- النسخة العربية