Spray foam insulation in Makkah: for companies (annual contract)
الخلاصة: In short: In Makkah (Makkah), spray foam insulation (for companies (annual contract)) begins with the roof, falls and drains survey and the thickness measurement at spread-out points; nothing is opened until the position is clear. The centre of Makkah sits about 301 m above sea level (SRTM open elevation data).
What is specific about Makkah for spray foam insulation
Team note on Makkah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins.. The centre of Makkah sits about 301 m above sea level (SRTM open elevation data).
The centre of Makkah sits about 301 m above sea level, according to SRTM open elevation data. For companies that hold property in the city, this elevation shapes how we plan spray foam work on roofs, plant rooms and building envelopes. Sites at this height are exposed to strong sun and heat during the day, and the surfaces we coat can expand and contract noticeably between seasons. We therefore check substrate condition and surface temperature before application, so the foam bonds properly and the insulation layer stays intact through the year.
Spray foam is priced at SAR 25–35 per m² in our annual contracts, and that range reflects the practical work involved. Because the work is planned across a whole year rather than one visit, we can schedule application in cooler parts of the day and leave time for each layer to cure. Spray foam sits alongside other items in the same contract, including liquid roof waterproofing at SAR 10–25 per m² and bitumen membrane at SAR 15–35 per m², so a company can plan roof protection as one package. Crack injection, priced at SAR 40–125 per m, is added where the foam meets a damaged edge, so the seal stays continuous.
Owners who manage several buildings often make the same errors, and our contracts are written to avoid them. The first is treating insulation as a one-off purchase and skipping inspection, which lets small gaps grow into moisture problems. The second is coating over dusty or oily surfaces, which weakens adhesion from the start. The third is mixing unrelated items into one quote without comparing them line by line, which hides the true cost of basement waterproofing at SAR 55–160 per m² or epoxy coating at SAR 35–95 per m². Clear scope, regular checks and a written schedule keep the work predictable and the buildings properly sealed.
For companies, an annual contract sets the scope, the visit schedule and the reports in writing.
When do you need spray foam insulation?
The following signs are worth checking before they grow:
- Leaks from the panel joints
- A hot metal-sheet roof or hangar
- Thermal and water insulation needed together
Where the problem usually comes from
- Joints in metal sheets and sandwich panels — we check this before anything else.
- No UV protection on the surface — we check this before anything else.
How we choose the tool in Makkah
| Tool or method | What it measures | Why it is chosen here |
|---|---|---|
| Flood test | Whether the waterproofing holds before it is covered | Limits: for roofs with drains and wet areas before tiling |
| Thickness measurement at spread-out points | Whether the thickness in the quote was achieved | Limits: for foam and liquid-applied layers |
| Roof, falls and drains survey | Ponding areas and the condition of the old layer | Limits: shows the condition, not the material alone |
From the first visit to the report
- Survey: Joints, fixings and gutters are checked.
- Preparation: The surface is cleaned and dried.
- Spraying in layers: Foam is applied in passes to the agreed thickness.
- Protection: A UV-resistant top coat protects the foam.
Facts and costs — Makkah
| Item | Value | Source |
|---|---|---|
| District profile | The centre of Makkah sits about 301 m above sea level (SRTM open elevation data) | SRTM (NASA) open data |
| District profile | Team note on Makkah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins. | Kashf team |
| Spray foam (per m²) | SAR 25–35 per m² | Owner price list (Makkah) |
Common questions about spray foam insulation in Makkah
What does finishing work typically include?
It covers plastering, painting, flooring, stone or marble walls, ceilings, gypsum, doors, windows, and final electrical and plumbing installations. You can request full or partial finishing, with the scope clearly defined in the price quote.
Is it possible to renovate the building without evacuating the residents?
In many cases it can be carried out in phases without a full evacuation if the damage is limited. However, for extensive structural renovation, a temporary evacuation may be recommended to ensure safety, and the contractor will explain this in their proposal.
Does waterproofing require removing existing tiles?
It depends on the site condition. Sometimes surface waterproofing can be applied over tiles, while deep leaks require tile removal to treat the layer underneath. A technician will determine the best option after inspection.
What is the first step of spray foam insulation (for companies (annual contract))?
We start with survey (joints, fixings and gutters are checked), then preparation (the surface is cleaned and dried).
How much does spray foam insulation cost in Makkah?
From our published price list: Spray foam (per m²) SAR 25–35 per m². Quantities are confirmed at the inspection.
What do I get at the end?
Thickness, density and materials in the quality record, in a technical report that carries a verification code.
Common mistakes we see
- Leaving foam exposed to the sun without protection
What you receive
The written output: thickness, density and materials in the quality record. The report is numbered and can be checked with its verification code.
If you live in Makkah and are new to the area
- If you rent, tell your landlord or building management before the visit and agree in writing who pays; the written report can be shared with them.
- Keep photos of the problem and of any earlier repairs — they help the technician compare before and after.
- Prices are in Saudi riyals (SAR); the final price is confirmed after the inspection, before any work starts.
- Have access ready to the water meter, the tank hatches, the roof and the main valve; in apartment buildings the roof keys are often with the building guard (haris).
Sources and method
- SRTM (NASA) open data
- Kashf team
- Customer questions (reviewed)
- Owner price list for Makkah
- Local pages are published only after a quality gate: real local facts, text similarity of no more than 15% with any other English page, and a claims check.
- النسخة العربية