Water tank waterproofing for clinics in Makkah
In short: Water tank waterproofing for clinics in Makkah starts with the fill test with level monitoring, then the crack injection (polyurethane or epoxy), before anything is opened. The centre of Makkah sits about 301 m above sea level (SRTM open elevation data). Pricing starts from Tank internal coating (per m²) (SAR 25–65 per m²), and other items are quoted after the visit.
What is specific about Makkah for water tank waterproofing
Team note on Makkah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins.. The centre of Makkah sits about 301 m above sea level (SRTM open elevation data).
A clinic owner in Makkah often runs a busy medical facility where a dependable water supply is essential for patient care, sterilisation and daily hygiene. The rooftop or ground-level water tank is easy to forget until a leak shows up as damp walls, staining in a treatment room or a sudden drop in pressure. By then the problem has usually spread into the building structure, so the owner needs a plan that protects the tank before trouble starts.
The centre of Makkah sits about 301 m above sea level (SRTM open elevation data), which means the city is not a low-lying basin where water collects on the surface, yet it still experiences heavy demand on its water systems and intense heat that stresses materials. For a clinic, this means the tank and its connecting surfaces work hard every day and should be inspected before the hot season sets in. Costs also vary by the type of work, so it helps to budget by surface. Tank internal coating is typically SAR 25–65 per m², epoxy coating SAR 35–95 per m², and crack injection SAR 40–125 per metre, while liquid roof waterproofing sits at SAR 10–25 per m². Knowing these ranges lets the owner compare quotes on a like-for-like basis.
Practical steps should follow a clear order. First, inspect the tank interior and the roof area above it, marking every crack and damp patch. Second, repair cracks by crack injection before any surface work, because coatings cannot bridge an open fault. Third, prepare the tank's inner surfaces and apply tank internal coating or epoxy coating where the tank holds water. Fourth, treat the roof with liquid roof waterproofing or a bitumen membrane, where the slope and access allow. Finally, schedule a re-check after the first full season of use and keep a simple record of each repaired area, so future maintenance can be planned rather than reacted to.
For clinics, work is scheduled around patient hours and kept to the areas that need it.
When do you need water tank waterproofing?
The following signs are worth checking before they grow:
- Deposits and flaking inside the tank
- A tank that leaks after testing
- Unusual colour or taste in the water
The most common causes
- Cracks in the walls or floor — we check this before anything else.
- Damaged old coating.
- Construction joints — we check this before anything else.
How we choose the tool in Makkah
| Method | What it helps with | Its role in Makkah |
|---|---|---|
| Moisture meter for ceilings and walls | Where water is entering now, from inside | Limits: measures the effect, not the water path |
| Crack injection (polyurethane or epoxy) | Stopping active water through cracks | Limits: treats the crack, not the water source |
| Fill test with level monitoring | Whether a tank coating holds after the work | Limits: takes time to monitor the level |
From the first visit to the report
- Emptying and ventilation: The tank is emptied and ventilated before entry.
- Cleaning and preparation: Loose material is removed down to a sound surface.
- Crack treatment: Active cracks are treated first.
- Coating layers: A material intended for drinking-water tanks is applied.
- Disinfection and fill test: The tank is disinfected and the level is monitored after filling.
Makkah in facts and sources
| Item | Value | Source |
|---|---|---|
| District profile | The centre of Makkah sits about 301 m above sea level (SRTM open elevation data) | SRTM (NASA) open data |
| District profile | Team note on Makkah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins. | Kashf team |
| Tank internal coating (per m²) | SAR 25–65 per m² | Owner price list (Makkah) |
Questions from Makkah
What does finishing work typically include?
It covers plastering, painting, flooring, stone or marble walls, ceilings, gypsum, doors, windows, and final electrical and plumbing installations. You can request full or partial finishing, with the scope clearly defined in the price quote.
Is it possible to renovate the building without evacuating the residents?
In many cases it can be carried out in phases without a full evacuation if the damage is limited. However, for extensive structural renovation, a temporary evacuation may be recommended to ensure safety, and the contractor will explain this in their proposal.
Does waterproofing require removing existing tiles?
It depends on the site condition. Sometimes surface waterproofing can be applied over tiles, while deep leaks require tile removal to treat the layer underneath. A technician will determine the best option after inspection.
Where does water tank waterproofing for clinics start in Makkah?
We start with emptying and ventilation (the tank is emptied and ventilated before entry), then cleaning and preparation (loose material is removed down to a sound surface).
What does water tank waterproofing cost in Makkah?
From our published price list: Tank internal coating (per m²) SAR 25–65 per m². Quantities are confirmed at the inspection.
What do I receive after the work?
The material name, its batch number and the fill-test result, in a technical report that carries a verification code.
Mistakes that cost more
- Using a material that is not intended for drinking water
The written outputs
The written output: the material name, its batch number and the fill-test result. The report is numbered and can be checked with its verification code.
If you live in Makkah and are new to the area
- If you rent, tell your landlord or building management before the visit and agree in writing who pays; the written report can be shared with them.
- Keep photos of the problem and of any earlier repairs — they help the technician compare before and after.
- Prices are in Saudi riyals (SAR); the final price is confirmed after the inspection, before any work starts.
- Have access ready to the water meter, the tank hatches, the roof and the main valve; in apartment buildings the roof keys are often with the building guard (haris).
Sources and method
- SRTM (NASA) open data
- Kashf team
- Customer questions (reviewed)
- Owner price list for Makkah
- Local pages are published only after a quality gate: real local facts, text similarity of no more than 15% with any other English page, and a claims check.
- النسخة العربية