Wall damp treatment for apartments in Makkah
In short: Wall damp treatment for apartments in Makkah starts with the moisture meter for ceilings and walls, then the thermal camera, before anything is opened. The centre of Makkah sits about 301 m above sea level (SRTM open elevation data). Published price: Inspection visit, SAR 150 per visit; anything else is quoted after the inspection.
Before we start: what we know about Makkah
The centre of Makkah sits about 301 m above sea level (SRTM open elevation data). Team note on Makkah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins..
Why does the wall in my apartment in Makkah keep going damp, and what will it cost to fix? Damp walls here usually come from water getting into the structure, and the right fix depends on where that water is entering. Makkah's centre sits about 301 m above sea level, so the way water moves through older buildings and ground-level flats is tied to the local terrain and drainage. Rather than guess, the sensible first step is to match the type of damp to the treatment, because the costs vary widely. Basement waterproofing runs SAR 55–160 per m², bathroom waterproofing SAR 15–40 per m², and crack injection SAR 40–125 per metre. Spray foam sits at SAR 20–45 per m², while epoxy coating ranges from SAR 35–95 per m².
A proper inspection starts by identifying where the moisture is coming from before any product is chosen. The technician will look at the wall surfaces inside the flat, checking for damp patches near bathrooms, along the base of walls, and under windows. Cracks are traced and measured in metres, since injection is priced per metre, and the condition of the roof is assessed separately, because liquid roof waterproofing is priced at SAR 10–25 per m² and a bitumen membrane at SAR 15–35 per m². If the flat sits above a water tank or has a basement below it, those areas are inspected too, as tank internal coating costs SAR 25–65 per m² and XPS boards SAR 15–30 per m². Each area is measured in square metres so the quote reflects the real surface being treated.
Before the visit, gather what helps the technician work accurately. Note where you have seen damp, when it appears, and whether it worsens after rain or after running water in the bathroom. Take photographs of any cracks or stains, and mark the rough locations on a simple sketch of the flat. Clear the area around the affected walls so the surfaces can be reached, and let the technician know if the space sits above a tank, below another flat, or at ground level. Having this information ready lets the inspection move quickly and gives you a clearer basis for comparing the treatment options and their per-square-metre or per-metre prices.
In apartment buildings, the floor below is often where a leak shows first.
Signs that call for wall damp treatment
If you notice one of these signs in Makkah, it is a good moment to talk to the team:
- Peeling paint and salt marks
- A musty smell
- Black spots on the wall
The most common causes
- Condensation.
- A leaking pipe — we check this before anything else.
- A common cause: rising damp from the ground.
How we choose the tool in Makkah
| Tool or method | What it measures | Why it is chosen here |
|---|---|---|
| Roof, falls and drains survey | Ponding areas and the condition of the old layer | Limits: shows the condition, not the material alone |
| Moisture meter for ceilings and walls | Where water is entering now, from inside | Limits: measures the effect, not the water path |
| Thermal camera | Wet areas and heat loss in the roof | Limits: needs a day–night temperature difference |
From the first visit to the report
- Moisture readings: Readings are taken in a grid across the wall.
- Finding the cause: Pipe, condensation or rising damp.
- Treatment: The cause is treated before the finish.
- Finishing: Plaster and paint after the wall has dried.
Makkah in facts and sources
| Item | Value | Source |
|---|---|---|
| District profile | Team note on Makkah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins. | Kashf team |
| District profile | The centre of Makkah sits about 301 m above sea level (SRTM open elevation data) | SRTM (NASA) open data |
| Inspection visit | SAR 150 per visit | Owner price list (Makkah) |
Short answers for Makkah
What does finishing work typically include?
It covers plastering, painting, flooring, stone or marble walls, ceilings, gypsum, doors, windows, and final electrical and plumbing installations. You can request full or partial finishing, with the scope clearly defined in the price quote.
Is it possible to renovate the building without evacuating the residents?
In many cases it can be carried out in phases without a full evacuation if the damage is limited. However, for extensive structural renovation, a temporary evacuation may be recommended to ensure safety, and the contractor will explain this in their proposal.
Does waterproofing require removing existing tiles?
It depends on the site condition. Sometimes surface waterproofing can be applied over tiles, while deep leaks require tile removal to treat the layer underneath. A technician will determine the best option after inspection.
Where does wall damp treatment for apartments start in Makkah?
We start with moisture readings (readings are taken in a grid across the wall), then finding the cause (pipe, condensation or rising damp).
What does wall damp treatment cost in Makkah?
From our published price list: Inspection visit SAR 150 per visit. Quantities are confirmed at the inspection.
What do I receive after the work?
The cause and the proposed treatment, in a technical report that carries a verification code.
Mistakes that cost more
- Painting over damp
What you receive
You receive: the cause and the proposed treatment, in a technical report with a verification code.
Practical notes for residents of Makkah
- Have access ready to the water meter, the tank hatches, the roof and the main valve; in apartment buildings the roof keys are often with the building guard (haris).
- Prices are in Saudi riyals (SAR); the final price is confirmed after the inspection, before any work starts.
- Keep photos of the problem and of any earlier repairs — they help the technician compare before and after.
- If you rent, tell your landlord or building management before the visit and agree in writing who pays; the written report can be shared with them.
Sources and method
- SRTM (NASA) open data
- Kashf team
- Customer questions (reviewed)
- Owner price list for Makkah
- Local pages are published only after a quality gate: real local facts, text similarity of no more than 15% with any other English page, and a claims check.
- النسخة العربية