Home About Us Services Guide Emergency Service Our Services Documented Report Tools Hub Glossary Blog Service Cities FAQ Pest Control Contact Us
Book onlineTracking number at once · no holdCall nowWater leak emergencyWhatsAppMessage us

Wall damp treatment in Makkah: emergency

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

In short: Wall damp treatment (emergency) in Makkah starts with the moisture meter for ceilings and walls, then the thermal camera, before anything is opened. The centre of Makkah sits about 301 m above sea level (SRTM open elevation data). Published price: Inspection visit, SAR 150 per visit; anything else is quoted after the inspection.

What is specific about Makkah for wall damp treatment

Team note on Makkah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins.. The centre of Makkah sits about 301 m above sea level (SRTM open elevation data).

Is your wall damp a problem that needs fixing today, or can it wait? For many property owners in Makkah, the answer depends on how quickly water is moving through the structure and what is causing it. The centre of Makkah sits about 301 m above sea level (SRTM open elevation data), and that is a useful starting point for thinking about how water behaves on a site. Damp that appears suddenly, spreads fast, or shows up in a basement or on a wall that was dry before is a reason to act without delay. Each treatment type has its own cost range, so knowing what is likely to be needed helps you plan. Basement waterproofing typically runs SAR 55–160 per m², bathroom waterproofing SAR 15–40 per m², and crack injection SAR 40–125 per metre. Epoxy coating, spray foam, and bitumen membrane each fall within their own published ranges, so the right choice depends on where the damp is and how it enters.

When a technician attends an emergency call, the inspection usually follows a clear sequence. They first look at where the damp appears on the wall and whether it is rising from the floor, coming through a crack, or running in from a roof or bathroom above. Next they check the surfaces around the affected area, noting any cracks that can be measured in metres and any joints where water could be getting in. They then decide which treatment fits the problem, such as crack injection for a visible split, liquid roof waterproofing at SAR 10–25 per m² for a roof source, or XPS boards at SAR 15–30 per m² where insulation and moisture control are both needed. The findings are explained before any work starts, so you understand what is being recommended and why.

Before the visit, it helps to prepare a few things so the inspection can move quickly. Clear the space around the damp wall where you can, and note when you first saw the damp and whether it has grown since. Take photos or a short video showing the spread, and mention any recent rain, leaks from pipes, or work carried out nearby. Make sure the technician can reach the basement, bathroom, or roof access they need. Having this information ready lets the inspection focus on the cause, which is the step that makes the repair last.

Service-area map for waterproofing & insulation in MakkahMakkah2 kmNSchematic · coordinates from Kashf data
Approximate area of Makkah — a schematic that does not show any customer address.

If water is flowing, close the main valve first, then call or message with photos.

Signs that call for wall damp treatment

These are the signs most often linked to wall damp treatment:

Where the problem usually comes from

Tools and methods, and when we use them

MethodWhat it helps withIts role in Makkah
Thermal cameraWet areas and heat loss in the roofLimits: needs a day–night temperature difference
Moisture meter for ceilings and wallsWhere water is entering now, from insideLimits: measures the effect, not the water path
Roof, falls and drains surveyPonding areas and the condition of the old layerLimits: shows the condition, not the material alone

From the first visit to the report

  1. Moisture readings: Readings are taken in a grid across the wall.
  2. Finding the cause: Pipe, condensation or rising damp.
  3. Treatment: The cause is treated before the finish.
  4. Finishing: Plaster and paint after the wall has dried.

Makkah in facts and sources

ItemValueSource
District profileThe centre of Makkah sits about 301 m above sea level (SRTM open elevation data)SRTM (NASA) open data
District profileTeam note on Makkah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins.Kashf team
Inspection visitSAR 150 per visitOwner price list (Makkah)

Questions from Makkah

What does finishing work typically include?

It covers plastering, painting, flooring, stone or marble walls, ceilings, gypsum, doors, windows, and final electrical and plumbing installations. You can request full or partial finishing, with the scope clearly defined in the price quote.

Is it possible to renovate the building without evacuating the residents?

In many cases it can be carried out in phases without a full evacuation if the damage is limited. However, for extensive structural renovation, a temporary evacuation may be recommended to ensure safety, and the contractor will explain this in their proposal.

Does waterproofing require removing existing tiles?

It depends on the site condition. Sometimes surface waterproofing can be applied over tiles, while deep leaks require tile removal to treat the layer underneath. A technician will determine the best option after inspection.

Where does wall damp treatment (emergency) start in Makkah?

We start with moisture readings (readings are taken in a grid across the wall), then finding the cause (pipe, condensation or rising damp).

What does wall damp treatment cost in Makkah?

From our published price list: Inspection visit SAR 150 per visit. Quantities are confirmed at the inspection.

What do I receive after the work?

The cause and the proposed treatment, in a technical report that carries a verification code.

What we advise against

The written outputs

You receive: the cause and the proposed treatment, in a technical report with a verification code.

Planning the visit in Makkah

  • The Saudi weekend is Friday and Saturday; mention your preferred day and time when booking.
  • You can message us on WhatsApp in English; the booking details are sent back to you in the chat to confirm before the visit.
  • If you rent, tell your landlord or building management before the visit and agree in writing who pays; the written report can be shared with them.
  • Keep photos of the problem and of any earlier repairs — they help the technician compare before and after.

Sources and method

  • SRTM (NASA) open data
  • Kashf team
  • Customer questions (reviewed)
  • Owner price list for Makkah
  • Local pages are published only after a quality gate: real local facts, text similarity of no more than 15% with any other English page, and a claims check.
  • النسخة العربية