Wall damp treatment for warehouses in Makkah
In short: In Makkah (Makkah), wall damp treatment for warehouses begins with the moisture meter for ceilings and walls and the thermal camera; nothing is opened until the position is clear. The centre of Makkah sits about 301 m above sea level (SRTM open elevation data). Pricing starts from Inspection visit (SAR 150 per visit), and other items are quoted after the visit.
Why wall damp treatment differs in Makkah
Team note on Makkah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins.. The centre of Makkah sits about 301 m above sea level (SRTM open elevation data).
The centre of Makkah sits about 301 m above sea level, according to SRTM open elevation data. For warehouse owners, this matters because the surrounding ground and drainage behave differently from coastal sites, so a wall damp survey should always begin by tracing where water actually travels through the structure before any treatment is chosen. A raised inland position does not remove moisture risk, since seasonal rain, irrigation runoff and wash-down water from loading areas can still soak into lower wall sections and floor edges.
Each treatment in our price list suits a particular wall condition. Crack injection, priced at SAR 40–125 per m, is used where a single fault line is letting water through, while spray foam at SAR 20–45 per m² suits wider areas that need a continuous seal. Basement waterproofing at SAR 55–160 per m² applies where walls sit below ground, and epoxy coating at SAR 35–95 per m² is chosen where a smooth, wipeable finish is needed inside the building. Liquid roof waterproofing at SAR 10–25 per m² and bitumen membrane at SAR 15–35 per m² handle roof and upper-level exposure, and XPS boards at SAR 15–30 per m² can be fitted where insulation and moisture control are both required. Tank internal coating at SAR 25–65 per m² is only relevant where a storage tank sits on the premises.
Owners who avoid the most costly errors usually do three things. They do not paint over a damp wall without first finding and sealing the source, because the moisture will simply push the coating off within a short time. They do not choose the cheapest rate without checking the material suits the wall type and the water pressure involved. They also do not skip the inspection of cracks and joints, since a single unsealed gap can undo an otherwise sound treatment across a large area. Asking for a written scope that matches each wall section to a specific method keeps the work focused and the budget clear.
For warehouses, work is phased around operations and stored goods.
Signs worth paying attention to
If you notice one of these signs in Makkah, it is a good moment to talk to the team:
- A musty smell
- Peeling paint and salt marks
- Black spots on the wall
The most common causes
- A leaking pipe — we check this before anything else.
- Condensation — we check this before anything else.
- A common cause: rising damp from the ground.
Tools and methods, and when we use them
| Tool | What it finds | When we use it in Makkah |
|---|---|---|
| Roof, falls and drains survey | Ponding areas and the condition of the old layer | Limits: shows the condition, not the material alone |
| Thermal camera | Wet areas and heat loss in the roof | Limits: needs a day–night temperature difference |
| Moisture meter for ceilings and walls | Where water is entering now, from inside | Limits: measures the effect, not the water path |
How the work is done, step by step
- Moisture readings: Readings are taken in a grid across the wall.
- Finding the cause: Pipe, condensation or rising damp.
- Treatment: The cause is treated before the finish.
- Finishing: Plaster and paint after the wall has dried.
Facts and costs — Makkah
| Item | Value | Source |
|---|---|---|
| District profile | The centre of Makkah sits about 301 m above sea level (SRTM open elevation data) | SRTM (NASA) open data |
| District profile | Team note on Makkah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins. | Kashf team |
| Inspection visit | SAR 150 per visit | Owner price list (Makkah) |
Questions from Makkah
What does finishing work typically include?
It covers plastering, painting, flooring, stone or marble walls, ceilings, gypsum, doors, windows, and final electrical and plumbing installations. You can request full or partial finishing, with the scope clearly defined in the price quote.
Is it possible to renovate the building without evacuating the residents?
In many cases it can be carried out in phases without a full evacuation if the damage is limited. However, for extensive structural renovation, a temporary evacuation may be recommended to ensure safety, and the contractor will explain this in their proposal.
Does waterproofing require removing existing tiles?
It depends on the site condition. Sometimes surface waterproofing can be applied over tiles, while deep leaks require tile removal to treat the layer underneath. A technician will determine the best option after inspection.
What is the first step of wall damp treatment for warehouses?
We start with moisture readings (readings are taken in a grid across the wall), then finding the cause (pipe, condensation or rising damp).
How much does wall damp treatment cost in Makkah?
From our published price list: Inspection visit SAR 150 per visit. Quantities are confirmed at the inspection.
What do I get at the end?
The cause and the proposed treatment, in a technical report that carries a verification code.
Mistakes that cost more
- Painting over damp
The written outputs
You receive: the cause and the proposed treatment, in a technical report with a verification code.
Planning the visit in Makkah
- Keep photos of the problem and of any earlier repairs — they help the technician compare before and after.
- If you rent, tell your landlord or building management before the visit and agree in writing who pays; the written report can be shared with them.
- Have access ready to the water meter, the tank hatches, the roof and the main valve; in apartment buildings the roof keys are often with the building guard (haris).
- Prices are in Saudi riyals (SAR); the final price is confirmed after the inspection, before any work starts.
Sources and method
- SRTM (NASA) open data
- Kashf team
- Customer questions (reviewed)
- Owner price list for Makkah
- Local pages are published only after a quality gate: real local facts, text similarity of no more than 15% with any other English page, and a claims check.
- النسخة العربية