Floor & balcony waterproofing for clinics in Samtah

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

Why floor & balcony waterproofing differs in Samtah

The centre of Samtah sits about 61 m above sea level (SRTM open elevation data). Samtah is about 22.6 km from the sea coast (OpenStreetMap).

Team note on Samtah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins.. Main roads in or near Samtah: Al-Turshiyah and Al-Najmiyah Road, Samtah.

Before any material is chosen for a clinic floor or balcony in Samtah, the technician checks the site's position in the landscape. The centre of Samtah sits about 61 m above sea level (SRTM open elevation data), and the town is about 22.6 km from the sea coast (OpenStreetMap). Those two facts shape the first questions: how water is likely to drain across a sloped or flat surface, and how much salt-laden air is likely to reach exposed edges and railings. A clinic floor used by patients who track water in, and a balcony exposed to weather and sun, both need a surface that stays sealed under daily wear, so the first check is always the existing substrate, its slope to outlets, and any signs of moisture already moving through the slab.

Several things cannot be settled from a description and are left to the site visit. The technician must measure the actual area and length of cracks, look for active leaks, test the substrate for moisture, and confirm whether the floor is a finished tile surface, bare concrete, or a previous membrane that may need removal. Price ranges from the published rates are only a starting point. Liquid roof waterproofing sits at SAR 8–25 per m² and bitumen membrane at SAR 15–35 per m², while epoxy coating runs from SAR 35–90 per m² and spray foam from SAR 20–45 per m². Which of these fits a clinic floor, and whether a crack needs injection at SAR 40–120 per metre, can only be decided once the surface has been inspected in person.

For the technician, it helps to arrive with the clinic's floor plan, the balcony dimensions, and a note of where water has previously appeared. Ask the clinic whether treatment must be done in stages so that consulting rooms stay in use, and confirm the drying time needed before patients can walk on the new surface. Record the photos of each drain, threshold and wall junction, since these are the spots where failure most often starts. A clear sketch of slopes and outlets makes the quote and the work far more accurate.

For clinics, work is scheduled around patient hours and kept to the areas that need it.

Signs worth paying attention to

If you notice one of these signs in Samtah, it is a good moment to talk to the team:

• Water passing from the balcony to the floor below
• A wrong fall towards the door threshold
• Damp under the light well

Causes we see in the field

• A threshold without waterproofing — we check this before anything else.
• A common cause: incorrect falls.
• A blocked drain.

How we choose the tool in Samtah

How the work is done, step by step

1. Checking the falls: Where water collects and where it should go.
2. Details: Thresholds, drains and upstands.
3. Waterproofing: The layer is applied and protected.
4. Flood test: Tested before the finish goes on.

Quick comparison: facts and costs in Samtah

Questions from Samtah

Common mistakes we see

• Tiling a balcony without waterproofing

What you receive

You receive: the flood result and photos of the details, in a technical report with a verification code.