Epoxy coating & waterproofing in Sharurah: without breaking

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

What is specific about Sharurah for epoxy coating & waterproofing

Main roads in or near Sharurah: King Abdulaziz Road, King Fahd Road. The centre of Sharurah sits about 724 m above sea level (SRTM open elevation data).

Team note on Sharurah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins..

Before any product is chosen in Sharurah, the first thing checked is the height of the ground, because the centre of the town sits about 724 m above sea level. At that altitude the surfaces a technician works on can behave differently from those at the coast, so the crew looks at the substrate, its age and its moisture before deciding anything about epoxy, spray foam or a membrane. The price ranges that apply to each option are useful for a first comparison, but they are only a starting point. Epoxy coating is listed at SAR 35–90 per m², spray foam at SAR 20–45 per m², and bitumen membrane at SAR 15–35 per m², and the right choice depends on what the surface has to do once it is finished.

Several things can only be judged on the day. The technician walks the area to see where water actually collects, whether cracks are moving or simply hairline, and whether the existing layer is sound enough to bond to. For a basement, the depth of the wall and any signs of seepage decide whether the work is priced in the SAR 50–150 per m² band. For a tank, the condition of the inner face and how it will be cleaned and emptied before coating begins are judged in person. Crack injection, priced at SAR 40–120 per metre, is only chosen once the crack has been traced to its full length. Access, ventilation and the timing of the job around daily use are also settled at this visit, not from a photo or a phone call.

To help the technician arrive prepared, it is worth noting the exact rooms, roofs or tanks involved, roughly how large each surface is in square metres, and any places where water has been seen. Photographs taken in daylight, showing the surface and any cracks next to a measuring tape, save time. Tell the crew whether the area is still in use, whether there are pets or children around the work zone, and when the space can be emptied. Mention any previous repairs, since old sealant can prevent a new coat from gripping. With these details ready, the technician can match the right system to the surface, and the visit can focus on checking rather than guessing.

The aim is to locate the cause with instruments first, so any opening is limited to one point.

When do you need epoxy coating & waterproofing?

These are the signs most often linked to epoxy coating & waterproofing:

• A warehouse floor that is wearing away
• A tank that needs an easy-to-clean surface
• Oil stains on a floor

The most common causes

• A common cause: a damp surface that ruins adhesion.
• A common cause: insufficient preparation.

Tools we use in Sharurah

The steps in order

1. Surface moisture reading: Epoxy is applied only when the substrate is dry enough.
2. Careful preparation: Grinding and cleaning for adhesion.
3. Layers: Primer and body coats as specified.
4. Inspection: Thickness and curing are checked.

Facts and costs — Sharurah

Short answers for Sharurah

What we advise against

• Coating over a damp surface

What you get after the work

You receive: the epoxy system, thickness and curing time, in a technical report with a verification code.