Floor & balcony waterproofing in Tabuk: without breaking
In short: In Tabuk (Tabuk), floor & balcony waterproofing (without breaking) begins with the roof, falls and drains survey and the moisture meter for ceilings and walls; nothing is opened until the position is clear. The centre of Tabuk sits about 762 m above sea level (SRTM open elevation data). Pricing starts from Bathroom waterproofing (per m²) (SAR 15–40 per m²), and other items are quoted after the visit.
Before we start: what we know about Tabuk
Team note on Tabuk: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins.. The centre of Tabuk sits about 762 m above sea level (SRTM open elevation data).
An owner of a ground-floor flat with a small balcony, or a second-floor apartment above a shaded terrace, usually notices the problem only after a stain appears on the ceiling below or tiles start to lift near the balcony door. Nobody wants to lose days of living space or hire a crew that tears up the whole floor. The goal is simply to stop the water where it enters, at a cost and disruption that fits a home.
The centre of Tabuk sits about 762 m above sea level (SRTM open elevation data), which means the town is high and open to strong winds and wide temperature swings between day and night. Those swings make surfaces expand and contract, so hairline cracks form in screeds and balcony slabs over time. Rain, though rare, can arrive in short heavy bursts that test a weak seal. For you, this means the first job is usually finding the cracks and joints rather than coating the whole area. Spot repairs such as crack injection, priced per metre in the range of SAR 40–115 per m, are often the most economical starting point, while flat roofs and balcony surfaces may suit liquid roof waterproofing at SAR 10–25 per m² or a bitumen membrane at SAR 15–35 per m².
Work through the job in this order. First, inspect the surface after a rain or with a hose test, and mark every crack and any gap at the balcony threshold. Second, repair the cracks by injection and fill the threshold joint before anything else. Third, choose the surface treatment that suits the area: a liquid layer or membrane for open roofs and balconies, and a bathroom-grade system at SAR 15–40 per m² where water sits in wet rooms. Fourth, allow the full curing time the product requires before walking on it or letting water run across it. Finally, check the drainage outlets so water leaves the balcony rather than pooling against the wall. Doing these steps in sequence keeps the work small, the mess contained and the repair lasting.
The aim is to locate the cause with instruments first, so any opening is limited to one point.
Signs worth paying attention to
The following signs are worth checking before they grow:
- A wrong fall towards the door threshold
- Water passing from the balcony to the floor below
- Damp under the light well
The most common causes
- Incorrect falls.
- A common cause: a threshold without waterproofing.
- A common cause: a blocked drain.
Tools and methods, and when we use them
| Tool or method | What it measures | Why it is chosen here |
|---|---|---|
| Flood test | Whether the waterproofing holds before it is covered | Limits: for roofs with drains and wet areas before tiling |
| Moisture meter for ceilings and walls | Where water is entering now, from inside | Limits: measures the effect, not the water path |
| Roof, falls and drains survey | Ponding areas and the condition of the old layer | Limits: shows the condition, not the material alone |
How the work is done, step by step
- Checking the falls: Where water collects and where it should go.
- Details: Thresholds, drains and upstands.
- Waterproofing: The layer is applied and protected.
- Flood test: Tested before the finish goes on.
Tabuk in facts and sources
| Item | Value | Source |
|---|---|---|
| District profile | The centre of Tabuk sits about 762 m above sea level (SRTM open elevation data) | SRTM (NASA) open data |
| District profile | Team note on Tabuk: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins. | Kashf team |
| Bathroom waterproofing (per m²) | SAR 15–40 per m² | Owner price list (Tabuk) |
Questions from Tabuk
What is the first step of floor & balcony waterproofing (without breaking)?
We start with checking the falls (where water collects and where it should go), then details (thresholds, drains and upstands).
How much does floor & balcony waterproofing cost in Tabuk?
From our published price list: Bathroom waterproofing (per m²) SAR 15–40 per m². Quantities are confirmed at the inspection.
What do I get at the end?
The flood result and photos of the details, in a technical report that carries a verification code.
Common mistakes we see
- Tiling a balcony without waterproofing
The written outputs
The written output: the flood result and photos of the details. The report is numbered and can be checked with its verification code.
If you live in Tabuk and are new to the area
- Keep photos of the problem and of any earlier repairs — they help the technician compare before and after.
- If you rent, tell your landlord or building management before the visit and agree in writing who pays; the written report can be shared with them.
- Have access ready to the water meter, the tank hatches, the roof and the main valve; in apartment buildings the roof keys are often with the building guard (haris).
- Prices are in Saudi riyals (SAR); the final price is confirmed after the inspection, before any work starts.
Sources and method
- SRTM (NASA) open data
- Kashf team
- Owner price list for Tabuk
- Local pages are published only after a quality gate: real local facts, text similarity of no more than 15% with any other English page, and a claims check.
- النسخة العربية