Floor & balcony waterproofing for hotels & serviced apartments in Aldarb
الخلاصة: In short: In Aldarb (Aldarb), floor & balcony waterproofing for hotels & serviced apartments begins with the roof, falls and drains survey and the moisture meter for ceilings and walls; nothing is opened until the position is clear. The centre of Aldarb sits about 79 m above sea level (SRTM open elevation data).
What is specific about Aldarb for floor & balcony waterproofing
The centre of Aldarb sits about 79 m above sea level (SRTM open elevation data). Aldarb is about 18.7 km from the sea coast (OpenStreetMap).
The owner of a hotel or serviced apartment building in Aldarb usually faces a tough balancing act. Guests expect dry rooms, clean balconies and no stains on ceilings, while the building must keep running through every season. A leak that starts on a balcony slab can reach a guest bedroom below within days, and by then the damage to finishes, furniture and the guest experience is already done. For owners who manage several floors and many units at once, the question is less about whether to waterproof and more about where to start and how to schedule the work so rooms can stay open.
Aldarb's position explains why this planning matters. The centre of the town sits about 79 m above sea level, and it lies about 18.7 km from the sea coast, so the site is inland rather than right on the shoreline. That means owners should not assume that a salt-air or coastal exposure drives every decision, yet the elevation and distance still shape how water moves across roofs, terraces and balconies. Rain runs off quickly on sloping surfaces and collects at joints, drains and low edges, so these points deserve the closest attention. Owners should treat the balcony floor, the junctions with the wall and the drainage outlets as the first priorities, and should not overlook the roof either.
A practical sequence helps keep costs and disruption under control. First, survey each floor and balcony, marking cracks, ponding spots and any staining on ceilings below. Second, match each problem to a method: crack injection is priced per metre, typically SAR 40–120 per m, while liquid roof waterproofing runs SAR 8–25 per m² and a bitumen membrane runs SAR 15–35 per m². Third, decide on a finish for exposed floors, where epoxy coating at SAR 35–90 per m² or spray foam at SAR 20–45 per m² may suit the job. Fourth, schedule works floor by floor, so occupied rooms stay available. Finally, record each area treated so future inspections can compare results against the original survey.
For hotels and serviced apartments, rooms are handled in batches to keep units available.
Signs worth paying attention to
If you notice one of these signs in Aldarb, it is a good moment to talk to the team:
- Water passing from the balcony to the floor below
- A wrong fall towards the door threshold
- Damp under the light well
Where the problem usually comes from
- A threshold without waterproofing.
- Incorrect falls — we check this before anything else.
- A blocked drain — we check this before anything else.
Tools and methods, and when we use them
| Tool or method | What it measures | Why it is chosen here |
|---|---|---|
| Flood test | Whether the waterproofing holds before it is covered | Limits: for roofs with drains and wet areas before tiling |
| Roof, falls and drains survey | Ponding areas and the condition of the old layer | Limits: shows the condition, not the material alone |
| Moisture meter for ceilings and walls | Where water is entering now, from inside | Limits: measures the effect, not the water path |
From the first visit to the report
- Checking the falls: Where water collects and where it should go.
- Details: Thresholds, drains and upstands.
- Waterproofing: The layer is applied and protected.
- Flood test: Tested before the finish goes on.
Facts and costs — Aldarb
| Item | Value | Source |
|---|---|---|
| District profile | Aldarb is about 18.7 km from the sea coast (OpenStreetMap) | © OpenStreetMap contributors (ODbL) |
| District profile | The centre of Aldarb sits about 79 m above sea level (SRTM open elevation data) | SRTM (NASA) open data |
| Bathroom waterproofing (per m²) | SAR 15–40 per m² | Owner price list (Aldarb) |
Short answers for Aldarb
What is the first step of floor & balcony waterproofing for hotels & serviced apartments?
We start with checking the falls (where water collects and where it should go), then details (thresholds, drains and upstands).
How much does floor & balcony waterproofing cost in Aldarb?
From our published price list: Bathroom waterproofing (per m²) SAR 15–40 per m². Quantities are confirmed at the inspection.
What do I get at the end?
The flood result and photos of the details, in a technical report that carries a verification code.
What we advise against
- Tiling a balcony without waterproofing
The written outputs
The written output: the flood result and photos of the details. The report is numbered and can be checked with its verification code.
Planning the visit in Aldarb
- Prices are in Saudi riyals (SAR); the final price is confirmed after the inspection, before any work starts.
- Have access ready to the water meter, the tank hatches, the roof and the main valve; in apartment buildings the roof keys are often with the building guard (haris).
- If you rent, tell your landlord or building management before the visit and agree in writing who pays; the written report can be shared with them.
- Keep photos of the problem and of any earlier repairs — they help the technician compare before and after.
Sources and method
- SRTM (NASA) open data
- © OpenStreetMap contributors (ODbL)
- Owner price list for Aldarb
- Local pages are published only after a quality gate: real local facts, text similarity of no more than 15% with any other English page, and a claims check.
- النسخة العربية