Home About Us Services Guide Emergency Service Our Services Documented Report Tools Hub Glossary Blog Service Cities FAQ Pest Control Contact Us
Book onlineTracking number at once · no holdCall nowWater leak emergencyWhatsAppMessage us

Basement & foundation waterproofing for apartments in Allith

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

In short: In Allith (Allith), basement & foundation waterproofing for apartments begins with the moisture meter for ceilings and walls and the crack injection (polyurethane or epoxy); nothing is opened until the position is clear. The centre of Allith sits about 5 m above sea level (SRTM open elevation data). Published price: Crack injection (per metre), SAR 40–120 per m; anything else is quoted after the inspection.

What is specific about Allith for basement & foundation waterproofing

Main roads in or near Allith: Al Laith Road, Amr Bin Al Aas Street. The centre of Allith sits about 5 m above sea level (SRTM open elevation data).

Allith is about 1.2 km from the sea coast (OpenStreetMap).

Picture an apartment owner in Allith who lives on the ground floor of a small building and keeps a storage basement below. After a heavy shower, they notice a damp patch spreading up a wall and a faint smell in the corridor. They are not sure whether the problem is coming through the walls, the floor, or from the surface above, and they want a clear plan before paying for any work.

The local facts matter here. The centre of Allith sits about 5 m above sea level, and the area is about 1.2 km from the sea coast. A site this close to the coast and this low can see groundwater and moisture rise more readily, so a basement or ground-level wall is more exposed than it might be on higher ground. For an owner, this means water is less likely to be a one-off surface issue and more likely to be a steady pressure from below or from the surrounding soil, which is why a basement waterproofing assessment is worth doing before any cosmetic repairs.

A sensible sequence starts with inspection. Walk the basement after rain and mark every damp line, stain, and crack, then check whether water enters at the joints between wall and floor. Next, decide the scope: treat cracks with crack injection, which is priced per metre, and treat larger wall or floor areas with basement waterproofing, which is priced per square metre. Where the basement stores water-sensitive items, an epoxy coating or spray foam can be added to exposed surfaces, while bathrooms above should be checked separately with bathroom waterproofing. Finally, request written quantities from each provider, compare them against the per-square-metre and per-metre rates, and confirm that the work covers the exact areas you marked during your inspection.

Service-area map for waterproofing & insulation in AllithAllith2 kmNSchematic · coordinates from Kashf data
Approximate area of Allith — a schematic that does not show any customer address.

In an apartment, a problem may start in your unit or in a shared line; we separate the two before any work.

Signs worth paying attention to

These are the signs most often linked to basement & foundation waterproofing:

Causes we see in the field

Tools and methods, and when we use them

MethodWhat it helps withIts role in Allith
Moisture meter for ceilings and wallsWhere water is entering now, from insideLimits: measures the effect, not the water path
Crack injection (polyurethane or epoxy)Stopping active water through cracksLimits: treats the crack, not the water source
Roof, falls and drains surveyPonding areas and the condition of the old layerLimits: shows the condition, not the material alone

The steps in order

  1. Finding the source: Groundwater, rain or a pipe — each needs a different treatment.
  2. Preparation: Surfaces are cleaned and opened where needed.
  3. Injection: Active cracks are injected.
  4. Waterproofing layers: The system is applied on the right side of the wall where possible.
  5. Follow-up: Readings are repeated after the treatment.

Quick comparison: facts and costs in Allith

ItemValueSource
RoadsMain roads in or near Allith: Al Laith Road, Amr Bin Al Aas StreetKashf data (owner)
District profileAllith is about 1.2 km from the sea coast (OpenStreetMap)© OpenStreetMap contributors (ODbL)
District profileThe centre of Allith sits about 5 m above sea level (SRTM open elevation data)SRTM (NASA) open data
Crack injection (per metre)SAR 40–120 per mOwner price list (Allith)
Basement waterproofing (per m²)SAR 50–150 per m²Owner price list (Allith)

Questions from Allith

What is the first step of basement & foundation waterproofing for apartments?

We start with finding the source (groundwater, rain or a pipe — each needs a different treatment), then preparation (surfaces are cleaned and opened where needed).

How much does basement & foundation waterproofing cost in Allith?

From our published price list: Crack injection (per metre) SAR 40–120 per m; Basement waterproofing (per m²) SAR 50–150 per m². Quantities are confirmed at the inspection.

What do I get at the end?

The source, the treatment and the follow-up result, in a technical report that carries a verification code.

Common mistakes we see

What you receive

The written output: the source, the treatment and the follow-up result. The report is numbered and can be checked with its verification code.

Planning the visit in Allith

  • You can message us on WhatsApp in English; the booking details are sent back to you in the chat to confirm before the visit.
  • The Saudi weekend is Friday and Saturday; mention your preferred day and time when booking.
  • Prices are in Saudi riyals (SAR); the final price is confirmed after the inspection, before any work starts.
  • Have access ready to the water meter, the tank hatches, the roof and the main valve; in apartment buildings the roof keys are often with the building guard (haris).

Sources and method