Floor & balcony waterproofing for hotels & serviced apartments in Balqarn
In short: Floor & balcony waterproofing for hotels & serviced apartments in Balqarn starts with the roof, falls and drains survey, then the moisture meter for ceilings and walls, before anything is opened. The centre of Balqarn sits about 501 m above sea level (SRTM open elevation data). Published price: Bathroom waterproofing (per m²), SAR 15–40 per m²; anything else is quoted after the inspection.
What is specific about Balqarn for floor & balcony waterproofing
The centre of Balqarn sits about 501 m above sea level (SRTM open elevation data).
The first thing checked at a floor and balcony waterproofing visit in Balqarn is the height of the site, because the centre of Balqarn sits about 501 m above sea level (SRTM open elevation data). At that elevation, the technician looks at how exposed the balconies and roof areas are to sun, wind and rain, since these conditions shape how quickly a membrane or coating will age. Hotels and serviced apartments often have many balconies with exposed edges, so the first pass focuses on drainage outlets, upstands and the junctions where a floor meets a wall. Cracks are noted at this stage too, and the crack injection rate of SAR 40–120 per metre is explained so the client understands that crack work is measured by length, not by area.
Several points are left to the site visit, because they cannot be judged from a description alone. The technician must see the current surface, whether it is tile, screed or concrete, and whether moisture is rising from below or coming in through the walls. Bathroom waterproofing is priced at SAR 15–40 per m², while basement waterproofing sits at SAR 50–150 per m², so the technician needs to confirm which zone each area belongs to before a quote is set. Epoxy coating at SAR 35–90 per m², spray foam at SAR 20–45 per m², and bitumen membrane at SAR 15–35 per m² are all candidate systems, and the final choice depends on the substrate, the traffic on the surface and the access available. Liquid roof waterproofing at SAR 8–25 per m² and XPS boards at SAR 12–30 per m² are also weighed against these conditions on site.
To help the technician prepare, the client should gather the approximate floor and balcony areas, the locations of any cracks, and notes on where water has been seen. A list of bathrooms, balconies and any tanks that may need internal coating at SAR 25–60 per m² makes the visit faster and the estimate more accurate. Access arrangements for occupied rooms and guest areas should also be agreed in advance, since work in a hotel or serviced apartment must fit around guests. Clear information at the start keeps the inspection focused and lets the technician move straight to the parts of the building where the decision really matters.
For hotels and serviced apartments, rooms are handled in batches to keep units available.
Signs worth paying attention to
These are the signs most often linked to floor & balcony waterproofing:
- A wrong fall towards the door threshold
- Water passing from the balcony to the floor below
- Damp under the light well
Causes we see in the field
- A common cause: incorrect falls.
- A common cause: a threshold without waterproofing.
- A blocked drain.
How we choose the tool in Balqarn
| Tool | What it finds | When we use it in Balqarn |
|---|---|---|
| Flood test | Whether the waterproofing holds before it is covered | Limits: for roofs with drains and wet areas before tiling |
| Moisture meter for ceilings and walls | Where water is entering now, from inside | Limits: measures the effect, not the water path |
| Roof, falls and drains survey | Ponding areas and the condition of the old layer | Limits: shows the condition, not the material alone |
How the work is done, step by step
- Checking the falls: Where water collects and where it should go.
- Details: Thresholds, drains and upstands.
- Waterproofing: The layer is applied and protected.
- Flood test: Tested before the finish goes on.
Facts and costs — Balqarn
| Item | Value | Source |
|---|---|---|
| District profile | The centre of Balqarn sits about 501 m above sea level (SRTM open elevation data) | SRTM (NASA) open data |
| Bathroom waterproofing (per m²) | SAR 15–40 per m² | Owner price list (Balqarn) |
Questions from Balqarn
Where does floor & balcony waterproofing for hotels & serviced apartments start in Balqarn?
We start with checking the falls (where water collects and where it should go), then details (thresholds, drains and upstands).
What does floor & balcony waterproofing cost in Balqarn?
From our published price list: Bathroom waterproofing (per m²) SAR 15–40 per m². Quantities are confirmed at the inspection.
What do I receive after the work?
The flood result and photos of the details, in a technical report that carries a verification code.
What we advise against
- Tiling a balcony without waterproofing
What you get after the work
You receive: the flood result and photos of the details, in a technical report with a verification code.
If you live in Balqarn and are new to the area
- Keep photos of the problem and of any earlier repairs — they help the technician compare before and after.
- If you rent, tell your landlord or building management before the visit and agree in writing who pays; the written report can be shared with them.
- Have access ready to the water meter, the tank hatches, the roof and the main valve; in apartment buildings the roof keys are often with the building guard (haris).
- Prices are in Saudi riyals (SAR); the final price is confirmed after the inspection, before any work starts.
Sources and method
- SRTM (NASA) open data
- Owner price list for Balqarn
- Local pages are published only after a quality gate: real local facts, text similarity of no more than 15% with any other English page, and a claims check.
- النسخة العربية