Basement & foundation waterproofing in Buraydah: without breaking

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

What is specific about Buraydah for basement & foundation waterproofing

Team note on Buraydah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins.. The centre of Buraydah sits about 606 m above sea level (SRTM open elevation data).

The first thing a technician checks in Buraydah is the ground the building sits on, because the centre of the city lies about 606 m above sea level. That height does not by itself decide whether a basement will leak, but it tells the technician to look at how water moves across the site and where it has nowhere to go. Before any product is named, the surfaces that touch the earth are inspected for cracks, old patches, and signs of past seepage such as staining, efflorescence or a damp line along the wall. Crack injection is priced at SAR 40–115 per metre, so the length and position of each crack are recorded early, since they shape both the method and the cost.

Several things are left to the site visit because they cannot be judged from a description. The depth of the basement, the condition of the existing membrane, the soil behind the walls and the exact route of rainwater off the roof all change the right choice. Basement waterproofing ranges from SAR 50–145 per m², while epoxy coating sits at SAR 35–85 per m² and spray foam at SAR 20–45 per m². The technician measures the area, looks at the wall and floor directly, and decides which system suits the conditions in front of them. Where a water tank is involved, internal coating at SAR 25–55 per m² is assessed on the same visit.

To help the technician arrive prepared, it is useful to note when leaks appear, whether they follow heavy rain or happen all year, and which rooms are affected. Photographs of the walls and any cracks, along with rough dimensions of the basement or affected zones, speed up the survey. Information about the roof also helps: liquid roof waterproofing runs SAR 10–25 per m², and bitumen membrane SAR 15–35 per m², so knowing the roof area and its current covering lets the technician compare options. Bathroom work, priced at SAR 15–40 per m², and insulation boards at SAR 10–30 per m² are best discussed on the day so the scope is clear from the start.

The aim is to locate the cause with instruments first, so any opening is limited to one point.

Signs that call for basement & foundation waterproofing

These are the signs most often linked to basement & foundation waterproofing:

• Salt marks at the bottom of the walls
• Damp basement walls
• Water seeping in after rain

The most common causes

• A high groundwater level — we check this before anything else.
• A common cause: rainwater draining towards the foundation.
• Cracks at construction joints.

Tools we use in Buraydah

The steps in order

1. Finding the source: Groundwater, rain or a pipe — each needs a different treatment.
2. Preparation: Surfaces are cleaned and opened where needed.
3. Injection: Active cracks are injected.
4. Waterproofing layers: The system is applied on the right side of the wall where possible.
5. Follow-up: Readings are repeated after the treatment.

Buraydah in facts and sources

Questions from Buraydah

Common mistakes we see

• Painting the basement wall while the water comes from outside

What you receive

The written output: the source, the treatment and the follow-up result. The report is numbered and can be checked with its verification code.