Epoxy coating & waterproofing in Buraydah: cost & published offers

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

Epoxy coating & waterproofing in Buraydah: the local context

The centre of Buraydah sits about 606 m above sea level (SRTM open elevation data). Team note on Buraydah: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins..

Start with the site itself, because in Buraydah the ground and the building both matter before any price is discussed. The centre of the city sits about 606 m above sea level (SRTM open elevation data), so the technician first checks how water is likely to move across the plot and where it will collect. Surfaces that have been wet for years, cracked floors, and areas where old coatings have lifted are noted at this stage. Published ranges are only a starting point: basement waterproofing is listed at SAR 50–145 per m², bathroom waterproofing at SAR 15–40 per m², and epoxy coating at SAR 35–85 per m², and the position of the work within the building decides which band is relevant.

Several things are left for the site visit, because they cannot be judged from a list. The technician measures the true area to be treated, confirms whether the substrate is sound enough to take epoxy or spray foam, and decides whether crack injection is needed, which is priced at SAR 40–115 per metre. Roof work is assessed separately, since liquid roof waterproofing runs at SAR 10–25 per m² and a bitumen membrane at SAR 15–35 per m². Tank interiors are inspected for the condition of the existing lining, with tank internal coating listed at SAR 25–55 per m². Where insulation is part of the plan, the surface is checked against the XPS boards range of SAR 10–30 per m², and spray foam at SAR 25–65 per m² is considered only once the substrate and access are confirmed.

For the technician, the most useful information is the sequence of checks and the reasons behind them. Record the elevation context, the exact location of each wet area, the type of finish already present, and every crack with its length in metres, so the quote reflects the real scope. Note whether surfaces are dry, clean and accessible, since these conditions govern how each system can be applied. Keep the estimate tied to the published ranges above and state clearly which element sits at which end of its range and why. A tidy record made on the day helps the homeowner or tenant understand the figures and makes the final scope easier to agree.

Prices shown on this page come from our own published price list for the city; the final price is set after inspection.

Signs worth paying attention to

If you notice one of these signs in Buraydah, it is a good moment to talk to the team:

• A tank that needs an easy-to-clean surface
• A warehouse floor that is wearing away
• Oil stains on a floor

Where the problem usually comes from

• Insufficient preparation.
• A damp surface that ruins adhesion.

Tools and methods, and when we use them

From the first visit to the report

1. Surface moisture reading: Epoxy is applied only when the substrate is dry enough.
2. Careful preparation: Grinding and cleaning for adhesion.
3. Layers: Primer and body coats as specified.
4. Inspection: Thickness and curing are checked.

Buraydah in facts and sources

Common questions about epoxy coating & waterproofing in Buraydah

Mistakes that cost more

• Coating over a damp surface

What you receive

You receive: the epoxy system, thickness and curing time, in a technical report with a verification code.