Epoxy Flooring & Coatings in An Naseem, Makkah
Azl — delivered with a written warranty, to the Saudi Building Code
About An Naseem
An Naseem in Makkah lies near the holy sites, bordering Al Jamiah, Al Hijrah, Al Awali and Kudai, served by the Third Ring Road and the Makkah–Taif road, with villas and apartments. The hot, dry climate most of the year makes roof thermal insulation the top need, while older buildings need roof cracks sealed before the rare but sometimes heavy rains. District guide
Why An Naseem homes need epoxy flooring & coatings
An Naseem in east Makkah is home to villas and apartment buildings, connected by Third Ring Road. In villas epoxy is usually requested for the garage, store and laundry, sometimes for annexes and majlis rooms in glossy easy-clean systems. The city's heat speeds epoxy cure and shortens working time, so it is laid in cooler hours. The fix: repair cracks and weak areas, test moisture, then a suitable primer and an epoxy system thick enough for the traffic.
- Main roads
- • Third Ring Road
- • Makkah–Taif Road
- • Muzdalifah Service Road
- Common buildings
- • villas
- • apartment buildings
Materials and specifications
- Epoxy primer: Seals the concrete pores and bonds the system; its type depends on slab moisture and porosity.
- Roller-applied epoxy coating: Two thin coats for majlis rooms, diwaniyas, offices and light-traffic storage.
- Self-levelling epoxy: A smooth seamless surface a few millimetres thick for showrooms, corridors, hospitals and kitchens.
- Epoxy mortar with quartz sand: For heavy loads, forklifts and car parks; can be textured for slip resistance.
- Aliphatic polyurethane topcoat: Improves scratch resistance and colour stability where light exposure is high, depending on the system.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in An Naseem
- Assess the floor: concrete age, surface strength and moisture using the tests set in the system's data sheet
- Prepare the surface mechanically by grinding or shot-blasting, then vacuum all dust
- Repair cracks, holes and construction joints with epoxy filler or mortar
- Apply the primer, respecting surface temperature and dew-point margin
- Apply the system coats at the specified consumption and thickness, broadcasting sand for slip-resistant finishes
- Apply the topcoat and close the area until full cure before traffic and loads
Indicative prices for typical An Naseem sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Smaller | 50 m² | 2,000 – 6,000 | Written, by work type |
| Typical | 125 m² | 4,400 – 15,000 | Written, by work type |
| Larger | 200 m² | 7,000 – 24,000 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Questions from An Naseem residents
How much does epoxy flooring cost for a villa in An Naseem, Makkah?
In An Naseem, for about 150 m² the indicative cost is SAR 5,250–18,000 before VAT (SAR 35–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits epoxy flooring in An Naseem?
Two-coat epoxy for light use, self-levelling for clean areas, and quartz screed for heavy loads and traffic.
How long does epoxy flooring take in An Naseem, and do you serve it?
The work takes typically two to five days including preparation, coats and curing before use. Makkah is one of the cities we serve directly; the inspection in An Naseem is scheduled by team availability.
Book an inspection in An Naseem
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy