Epoxy Flooring & Coatings in Masarrah, Taif
Azl — delivered with a written warranty, to the Saudi Building Code
About Masarrah
Masarrah is a quiet, modern district between Al-Mutamarat Road to the north and Al-Jaish Road to the south, crossed by King Abdullah Road and near King Fahd Park. Utilities are well organised and modern villas dominate, so insulation work focuses on wide roofs and exterior walls to cut heat loss on Taif's cold nights and guard against rain. District guide
Why Masarrah homes need epoxy flooring & coatings
Villas define Masarrah in central Taif, beside Al-Mutamarat Road. In villas epoxy is usually requested for the garage, store and laundry, sometimes for annexes and majlis rooms in glossy easy-clean systems. The altitude brings heavier rain and day–night temperature swings, so flexible materials and careful expansion joints are preferred. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. The fix: mechanical preparation and moisture testing, then an epoxy system matched to the use.
- Main roads
- • Al-Mutamarat Road
- • Al-Jaish Road
- • King Abdullah Road
- Nearby landmarks
- • King Fahd Park
- Common buildings
- • villas
Materials and specifications
- Epoxy primer: Seals the concrete pores and bonds the system; its type depends on slab moisture and porosity.
- Roller-applied epoxy coating: Two thin coats for majlis rooms, diwaniyas, offices and light-traffic storage.
- Self-levelling epoxy: A smooth seamless surface a few millimetres thick for showrooms, corridors, hospitals and kitchens.
- Epoxy mortar with quartz sand: For heavy loads, forklifts and car parks; can be textured for slip resistance.
- Aliphatic polyurethane topcoat: Improves scratch resistance and colour stability where light exposure is high, depending on the system.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Masarrah
- Assess the floor: concrete age, surface strength and moisture using the tests set in the system's data sheet
- Prepare the surface mechanically by grinding or shot-blasting, then vacuum all dust
- Repair cracks, holes and construction joints with epoxy filler or mortar
- Apply the primer, respecting surface temperature and dew-point margin
- Apply the system coats at the specified consumption and thickness, broadcasting sand for slip-resistant finishes
- Apply the topcoat and close the area until full cure before traffic and loads
Indicative prices for typical Masarrah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Smaller | 50 m² | 2,000 – 6,000 | Written, by work type |
| Typical | 125 m² | 4,400 – 15,000 | Written, by work type |
| Larger | 200 m² | 7,000 – 24,000 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Questions from Masarrah residents
How much does epoxy flooring cost for a villa in Masarrah, Taif?
In Masarrah, for about 150 m² the indicative cost is SAR 5,250–18,000 before VAT (SAR 35–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for epoxy flooring in Masarrah?
Two-coat epoxy for light use, self-levelling for clean areas, and quartz screed for heavy loads and traffic. Near King Fahd Park we also plan access and working hours.
How long does epoxy flooring take in Masarrah, and do you serve it?
The work takes typically two to five days including preparation, coats and curing before use. Taif is one of the cities we serve directly; the inspection in Masarrah is scheduled by team availability.
Book an inspection in Masarrah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy