Spray Foam Insulation (Polyurethane) in Shamal An Nafal, Sakaka
Azl — delivered with a written warranty, to the Saudi Building Code
About Shamal An Nafal
Shamal An Nafal is a Sakaka district crossed by Al Kawthar and An Nazaim streets, next to An Nafal district, with active listings for plots and homes. Newer houses and ready plots here are a chance to fit good roof waterproofing and insulation from the start, and to seal service penetrations that let in insects and reptiles from surrounding vacant land. District guide
Why Shamal An Nafal homes need spray foam insulation (polyurethane)
Villas define Shamal An Nafal in Sakaka, beside Al Kawthar Street. Spray foam suits detail-heavy villa roofs because it covers them in one seamless layer insulating against both heat and water. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. In the city's intense heat spraying is scheduled in cooler hours to keep the substrate within the manufacturer's limits. The fix: spray foam over the existing roof once dryness and adhesion are confirmed, after repairing cracks and falls.
- Main roads
- • Al Kawthar Street
- • An Nazaim Street
- Common buildings
- • villas
Materials and specifications
- High-density polyurethane foam: Density suited to trafficable roofs and compression.
- Acrylic or polyurea protective coat: Protects the foam from UV and reflects heat.
- Primer for metal or concrete: Improves adhesion depending on the substrate.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Shamal An Nafal
- Clean and fully dry the surface
- Mask walls and windows from overspray
- Spray the foam in passes to the required thickness
- Check thickness and evenness
- Apply the UV protective coat
- Final inspection and handover
Indicative prices for typical Shamal An Nafal sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Smaller | 250 m² | 7,500 – 13,750 | Written, by work type |
| Typical | 375 m² | 11,250 – 20,650 | Written, by work type |
| Larger | 500 m² | 15,000 – 27,500 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Questions from Shamal An Nafal residents
How much does spray foam insulation cost for a villa in Shamal An Nafal, Sakaka?
In Shamal An Nafal, for about 400 m² the indicative cost is SAR 12,000–22,000 before VAT (SAR 30–55 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for spray foam insulation in Shamal An Nafal?
Closed-cell roofing-grade PU foam at a thickness set by the thermal calculation, with an acrylic or polyurea protective coat.
How long does spray foam insulation take in Shamal An Nafal, and do you serve it?
The work takes often one to three days for medium roofs including the topcoat. We serve Sakaka on request; once we receive your request from Shamal An Nafal we coordinate a date by team availability and confirm it first.
Book an inspection in Shamal An Nafal
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy