Spray Foam Insulation (Polyurethane) in Al Manar, Unaizah
Azl — delivered with a written warranty, to the Saudi Building Code
About Al Manar
Prince Faisal bin Bandar Road and As Safir Ash Shubaili Road run through Al Manar in Unaizah, where villas, flats, apartment blocks and shops sit side by side. Flats and blocks need shared-roof waterproofing and pipework leak detection, roadside shops need roof upkeep, and the density calls for regular cockroach and rodent control. District guide
Why Al Manar homes need spray foam insulation (polyurethane)
Al Manar lies in Unaizah along Prince Faisal bin Bandar Road and As Safir Ash Shubaili Road, and is dominated by villas, apartment buildings and shops and commercial buildings. Spray foam suits detail-heavy villa roofs because it covers them in one seamless layer insulating against both heat and water. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. In the city's intense heat spraying is scheduled in cooler hours to keep the substrate within the manufacturer's limits. The fix: spray foam in phases by building use, with a walkable protective coat.
- Main roads
- • Prince Faisal bin Bandar Road
- • As Safir Ash Shubaili Road
- Common buildings
- • villas
- • apartment buildings
- • shops and commercial buildings
Materials and specifications
- High-density polyurethane foam: Density suited to trafficable roofs and compression.
- Acrylic or polyurea protective coat: Protects the foam from UV and reflects heat.
- Primer for metal or concrete: Improves adhesion depending on the substrate.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al Manar
- Clean and fully dry the surface
- Mask walls and windows from overspray
- Spray the foam in passes to the required thickness
- Check thickness and evenness
- Apply the UV protective coat
- Final inspection and handover
Indicative prices for typical Al Manar sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Smaller | 250 m² | 7,500 – 13,750 | Written, by work type |
| Typical | 375 m² | 11,250 – 20,650 | Written, by work type |
| Larger | 500 m² | 15,000 – 27,500 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Questions from Al Manar residents
How much does spray foam insulation cost for a villa in Al Manar, Unaizah?
In Al Manar, for about 400 m² the indicative cost is SAR 12,000–22,000 before VAT (SAR 30–55 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for spray foam insulation in Al Manar?
Closed-cell roofing-grade PU foam at a thickness set by the thermal calculation, with an acrylic or polyurea protective coat.
How long does spray foam insulation take in Al Manar, and do you serve it?
The work takes often one to three days for medium roofs including the topcoat. We serve Unaizah on request; once we receive your request from Al Manar we coordinate a date by team availability and confirm it first.
Book an inspection in Al Manar
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy