Roof Insulation in Al Hamra, Al Khobar
Azl — delivered with a written warranty, to the Saudi Building Code
About Al Hamra
Al Hamra in Khobar lies close to the corniche and the King Fahd Causeway approach, and is dominated by residential blocks with flats for sale and rent. Coastal humidity and salty air speed up the breakdown of roof membranes and rebar corrosion, so salt-resistant waterproofing and follow-up on bathroom leaks between flats matter, since trapped moisture attracts cockroaches and ants. District guide
Why Al Hamra homes need roof insulation
Al Hamra lies in Al Khobar along Al Qaysumah Street, and is dominated by apartment buildings and villas. An apartment building's roof is shared and crowded with AC units and flat tanks, so top-floor residents bear both the heat and the leaks. Being near the sea means humidity and salt that speed rebar corrosion and affect curing, so surface moisture and dew point are checked before any application. Intense heat most of the year makes roof thermal insulation a core part of the solution, not an optional extra. The fix: assess the existing system with a moisture survey; restore over it if dry, or strip and rebuild if saturated.
- Main roads
- • Al Qaysumah Street
- Nearby landmarks
- • King Fahd Causeway
- Common buildings
- • apartment buildings
- • villas
Materials and specifications
- Bituminous membrane (rolls): Durable torch-applied waterproofing, suited to large concrete roofs.
- Spray polyurethane foam: Seamless thermal and waterproof layer in one; needs a UV-protective topcoat.
- Liquid acrylic or polyurethane coating: Flexible layer ideal for maintenance and detailed roofs.
- Extruded polystyrene boards (XPS): Compression-resistant thermal insulation under tiles.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al Hamra
- Inspect the roof, measure the area and check slopes and drains
- Clean the surface, remove failed insulation and treat cracks
- Apply primer to ensure adhesion
- Install the waterproofing layer and turn it up the parapet walls
- Flood-test with water long enough to confirm no leaks
- Install thermal insulation and the protection layer or tiles
Indicative prices for typical Al Hamra sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Smaller | 300 m² | 13,500 – 25,500 | Written, by work type |
| Typical | 500 m² | 22,500 – 42,500 | Written, by work type |
| Larger | 700 m² | 31,500 – 59,500 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Questions from Al Hamra residents
How much does roof insulation cost for an apartment building in Al Hamra, Al Khobar?
In Al Hamra, for about 500 m² the indicative cost is SAR 22,500–42,500 before VAT (SAR 45–85 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for roof insulation in Al Hamra?
Commonly a bituminous or liquid membrane plus a thermal layer (foam or XPS) and protection, with thickness set by the thermal calculation. Near King Fahd Causeway we also plan access and working hours.
How long does roof insulation take in Al Hamra, and do you serve it?
The work takes typically two days to a week depending on area, layers and the flood test. Al Khobar is one of the cities we serve directly; the inspection in Al Hamra is scheduled by team availability.
Book an inspection in Al Hamra
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy