Roof Insulation in Qurwa, Taif
Azl — delivered with a written warranty, to the Saudi Building Code
About Qurwa
Qurwa is an established Taif district next to Al Khalidiyah, with villas, apartment buildings and commercial floors along streets such as Qurwa Street and Al Farazdaq Street, and listings note its closeness to the Taif Emirate building. Its mix of building ages means some need ageing roof insulation redone and water tanks serviced, while newer homes need thermal insulation and early termite treatment. District guide
Why Qurwa homes need roof insulation
Qurwa in Taif is home to villas, apartment buildings and shops and commercial buildings, connected by Qurwa Street. Villa roofs are wide, multi-level and crowded with AC bases and annexes, and every joint or opening is a weak point for rain or AC condensate. The altitude brings heavier rain and day–night temperature swings, so flexible materials and careful expansion joints are preferred. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. The fix: assess the existing system with a moisture survey; restore over it if dry, or strip and rebuild if saturated.
- Main roads
- • Qurwa Street
- • Al Farazdaq Street
- Common buildings
- • villas
- • apartment buildings
- • shops and commercial buildings
Materials and specifications
- Bituminous membrane (rolls): Durable torch-applied waterproofing, suited to large concrete roofs.
- Spray polyurethane foam: Seamless thermal and waterproof layer in one; needs a UV-protective topcoat.
- Liquid acrylic or polyurethane coating: Flexible layer ideal for maintenance and detailed roofs.
- Extruded polystyrene boards (XPS): Compression-resistant thermal insulation under tiles.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Qurwa
- Inspect the roof, measure the area and check slopes and drains
- Clean the surface, remove failed insulation and treat cracks
- Apply primer to ensure adhesion
- Install the waterproofing layer and turn it up the parapet walls
- Flood-test with water long enough to confirm no leaks
- Install thermal insulation and the protection layer or tiles
Indicative prices for typical Qurwa sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Smaller | 250 m² | 11,250 – 21,250 | Written, by work type |
| Typical | 375 m² | 16,900 – 31,900 | Written, by work type |
| Larger | 500 m² | 22,500 – 42,500 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Questions from Qurwa residents
How much does roof insulation cost for a villa in Qurwa, Taif?
In Qurwa, for about 400 m² the indicative cost is SAR 18,000–34,000 before VAT (SAR 45–85 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for roof insulation in Qurwa?
Commonly a bituminous or liquid membrane plus a thermal layer (foam or XPS) and protection, with thickness set by the thermal calculation.
How long does roof insulation take in Qurwa, and do you serve it?
The work takes typically two days to a week depending on area, layers and the flood test. Taif is one of the cities we serve directly; the inspection in Qurwa is scheduled by team availability.
Book an inspection in Qurwa
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy