Water Tank Insulation in Ar Rawdah, Al-Ahsa
Azl — delivered with a written warranty, to the Saudi Building Code
About Ar Rawdah
Ar Rawdah lies on the western side of Hofuf, bounded to the north by Imam Muhammad bin Abdulwahhab Street and crossed by King Abdullah and Al Uqair roads, with palm groves around it. Being close to farmland means damper soil around foundations, so careful waterproofing of footings and underground tanks matters here, alongside thermal insulation for villa and apartment-block roofs. District guide
Why Ar Rawdah homes need water tank insulation
Villas, apartment buildings and shops and commercial buildings define Ar Rawdah in west Al-Ahsa, beside King Abdullah Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. The surrounding farmland means big irrigation tanks and open spaces, so insulation is planned per facility use. A raised water table presses on ground-tank walls from outside, so systems that resist negative pressure are chosen. The fix: check the concrete first, repair honeycombing and cracks, then line the tank with a system suited to its age and condition.
- Main roads
- • King Abdullah Road
- • Imam Muhammad bin Abdulwahhab Street
- • Al Uqair Road
- • Al Khaleej Road
- Nearby landmarks
- • Prince Abdullah bin Jalawi Sports City
- Common buildings
- • villas
- • apartment buildings
- • shops and commercial buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Ar Rawdah
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Ar Rawdah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Ar Rawdah residents
How much does tank insulation cost for a villa in Ar Rawdah, Al-Ahsa?
In Ar Rawdah, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Ar Rawdah?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue. Near Prince Abdullah bin Jalawi Sports City we also plan access and working hours.
How long does tank insulation take in Ar Rawdah, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Al-Ahsa is one of the cities we serve directly; the inspection in Ar Rawdah is scheduled by team availability.
Book an inspection in Ar Rawdah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy