Water Tank Insulation in Ad Dabab, Al Baha
Azl — delivered with a written warranty, to the Saudi Building Code
About Ad Dabab
Ad Dabab is an Al-Baha city district named after the fog the city is known for, with plots offered for rent on Yazid ibn Muawiyah Street. Dense fog and constant humidity leave exterior walls saturated and paint peeling, so homes here need façade and roof waterproofing and treatment of rising damp, along with control of mosquitoes and insects that breed readily in the moist air. District guide
Why Ad Dabab homes need water tank insulation
Ad Dabab lies in Al Baha along Yazid ibn Muawiyah Street, and is dominated by villas. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. The altitude brings heavier rain and day–night temperature swings, so flexible materials and careful expansion joints are preferred. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. The fix: check the concrete first, repair honeycombing and cracks, then line the tank with a system suited to its age and condition.
- Main roads
- • Yazid ibn Muawiyah Street
- Common buildings
- • villas
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Ad Dabab
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Ad Dabab sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Ad Dabab residents
How much does tank insulation cost for a villa in Ad Dabab, Al Baha?
In Ad Dabab, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Ad Dabab?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Ad Dabab, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Al Baha on request; once we receive your request from Ad Dabab we coordinate a date by team availability and confirm it first.
Book an inspection in Ad Dabab
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy