Water Tank Insulation in An Nuzhah, Al Baha
Azl — delivered with a written warranty, to the Saudi Building Code
About An Nuzhah
An Nuzhah is a district of Al-Baha city with flats for rent on Al Harith As Saadi Street and its inner streets. Flats in middle-aged blocks suffer, in Al-Baha's climate, from damp patches on ceilings and mould on walls near bathrooms, so they need bathroom and roof re-waterproofing and damp treatment before repainting, while service rooms and shared stairwells need periodic cockroach and crawling-insect control. District guide
Why An Nuzhah homes need water tank insulation
Apartment buildings define An Nuzhah in Al Baha, beside Al Harith As Saadi Street. In apartment buildings one shared ground tank serves several flats, so a leak multiplies consumption and dampness in the adjacent basement and parking. The altitude brings heavier rain and day–night temperature swings, so flexible materials and careful expansion joints are preferred. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. The fix: check the concrete first, repair honeycombing and cracks, then line the tank with a system suited to its age and condition.
- Main roads
- • Al Harith As Saadi Street
- Common buildings
- • apartment buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in An Nuzhah
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical An Nuzhah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 15 m³ (≈ 29 m² internal) | 1,750 – 3,550 | Written, by work type |
| Medium tank | 28 m³ (≈ 44 m² internal) | 2,650 – 5,250 | Written, by work type |
| Large tank | 40 m³ (≈ 56 m² internal) | 3,350 – 6,700 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from An Nuzhah residents
How much does tank insulation cost for an apartment building in An Nuzhah, Al Baha?
In An Nuzhah, a tank of about 28 m³ has roughly 44 m² of internal surface, giving an indicative SAR 2,650–5,250 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in An Nuzhah?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in An Nuzhah, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Al Baha on request; once we receive your request from An Nuzhah we coordinate a date by team availability and confirm it first.
Book an inspection in An Nuzhah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy