Water Tank Insulation in As Sarawat, Al Baha
Azl — delivered with a written warranty, to the Saudi Building Code
About As Sarawat
As Sarawat is an Al-Baha city district named after the Sarawat mountain range on which the city sits, with residential plots offered on Bani Kabir Street. Plots on mountain slopes require foundation and footing waterproofing and tight rainwater drainage so water does not collect behind walls, and new construction needs thermal insulation to soften winter cold, with preventive treatment against termites and insects. District guide
Why As Sarawat homes need water tank insulation
As Sarawat in Al Baha is home to villas, connected by Bani Kabir Street. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. The altitude brings heavier rain and day–night temperature swings, so flexible materials and careful expansion joints are preferred. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • Bani Kabir Street
- Common buildings
- • villas
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in As Sarawat
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical As Sarawat sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from As Sarawat residents
How much does tank insulation cost for a villa in As Sarawat, Al Baha?
In As Sarawat, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in As Sarawat?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in As Sarawat, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Al Baha on request; once we receive your request from As Sarawat we coordinate a date by team availability and confirm it first.
Book an inspection in As Sarawat
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy