Water Tank Insulation in Ash Shati 1, Al Qunfudhah
Azl — delivered with a written warranty, to the Saudi Building Code
About Ash Shati 1
Ash Shati 1 is one of the newer residential plans in northern Al Qunfudhah, next to Al Khalidiyah B and the Central Services area, with five-room villas, flats and buildings near the beach, and plots on streets such as Amr Street close to services and university colleges. New building near the sea needs salt-resistant waterproofing from the outset, damp-proofed foundations and soil treatment against termites. District guide
Why Ash Shati 1 homes need water tank insulation
Villas and apartment buildings define Ash Shati 1 in Al Qunfudhah, beside Amr Street. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Being near the sea means humidity and salt that speed rebar corrosion and affect curing, so surface moisture and dew point are checked before any application. Many buildings in the district are under construction, and the best time to insulate is before tiling and backfill, with a flood test before covering. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • Amr Street
- Common buildings
- • villas
- • apartment buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Ash Shati 1
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Ash Shati 1 sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Ash Shati 1 residents
How much does tank insulation cost for a villa in Ash Shati 1, Al Qunfudhah?
In Ash Shati 1, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Ash Shati 1?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Ash Shati 1, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Al Qunfudhah on request; once we receive your request from Ash Shati 1 we coordinate a date by team availability and confirm it first.
Book an inspection in Ash Shati 1
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy