Water Tank Insulation in Ash Shuhada, Ar Rass
Azl — delivered with a written warranty, to the Saudi Building Code
About Ash Shuhada
Ash Shuhada in Ar Rass lies north of Al Hawtah, separated from it by Al Jarif Street, with Uthman ibn Affan Road on its side facing Al Hazm. As an established residential district near the town centre, its needs focus on roof insulation upkeep in villas and older buildings, leak repairs and periodic household insect control. District guide
Why Ash Shuhada homes need water tank insulation
Ash Shuhada lies in Ar Rass along Al Jarif Street and Uthman ibn Affan Road, and is dominated by villas and apartment buildings. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: check the concrete first, repair honeycombing and cracks, then line the tank with a system suited to its age and condition.
- Main roads
- • Al Jarif Street
- • Uthman ibn Affan Road
- Common buildings
- • villas
- • apartment buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Ash Shuhada
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Ash Shuhada sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Ash Shuhada residents
How much does tank insulation cost for a villa in Ash Shuhada, Ar Rass?
In Ash Shuhada, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Ash Shuhada?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Ash Shuhada, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Ar Rass on request; once we receive your request from Ash Shuhada we coordinate a date by team availability and confirm it first.
Book an inspection in Ash Shuhada
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy