Water Tank Insulation in Dahiyat Al Malik Fahd, Arar
Azl — delivered with a written warranty, to the Saudi Building Code
About Dahiyat Al Malik Fahd
Dahiyat Al Malik Fahd is a residential plan in Arar (including Plan B) whose residents have called for paving and lighting of main and side streets, citing water pooling in rainy seasons and dust. Streets include Al Harith bin Al Numan and Abu Yahya bin Suhaib. Such conditions make foundation and roof waterproofing, plus insect and rodent control, priorities in new homes. District guide
Why Dahiyat Al Malik Fahd homes need water tank insulation
Dahiyat Al Malik Fahd lies in Arar along Al Harith bin Al Numan Street and Abu Yahya bin Suhaib Street, and is dominated by villas and apartment buildings. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Many buildings in the district are under construction, and the best time to insulate is before tiling and backfill, with a flood test before covering. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • Al Harith bin Al Numan Street
- • Abu Yahya bin Suhaib Street
- Common buildings
- • villas
- • apartment buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Dahiyat Al Malik Fahd
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Dahiyat Al Malik Fahd sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Dahiyat Al Malik Fahd residents
How much does tank insulation cost for a villa in Dahiyat Al Malik Fahd, Arar?
In Dahiyat Al Malik Fahd, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits tank insulation in Dahiyat Al Malik Fahd?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Dahiyat Al Malik Fahd, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Arar on request; once we receive your request from Dahiyat Al Malik Fahd we coordinate a date by team availability and confirm it first.
Book an inspection in Dahiyat Al Malik Fahd
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy