Water Tank Insulation in An Nakhil, Dammam
Azl — delivered with a written warranty, to the Saudi Building Code
About An Nakhil
An Nakhil is a central Dammam district under the central municipality, enclosed by King Saud Street to the north, King Khalid Street to the south and 18th and 28th streets on either side. Next to the old market area and Al Adamah, it has buildings of many ages, so roof-leak inspections and insulating rooftop water tanks are common needs in its houses and blocks. District guide
Why An Nakhil homes need water tank insulation
An Nakhil lies in central Dammam along King Saud Street and 18th Street, and is dominated by apartment buildings, villas and older traditional houses. In apartment buildings one shared ground tank serves several flats, so a leak multiplies consumption and dampness in the adjacent basement and parking. High humidity affects bonding and curing, so application is scheduled in the least humid hours. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: check the concrete first, repair honeycombing and cracks, then line the tank with a system suited to its age and condition.
- Main roads
- • King Saud Street
- • 18th Street
- • King Khalid Street
- • 28th Street
- Common buildings
- • apartment buildings
- • villas
- • older traditional houses
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in An Nakhil
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical An Nakhil sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 15 m³ (≈ 29 m² internal) | 1,750 – 3,550 | Written, by work type |
| Medium tank | 28 m³ (≈ 44 m² internal) | 2,650 – 5,250 | Written, by work type |
| Large tank | 40 m³ (≈ 56 m² internal) | 3,350 – 6,700 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from An Nakhil residents
How much does tank insulation cost for an apartment building in An Nakhil, Dammam?
In An Nakhil, a tank of about 28 m³ has roughly 44 m² of internal surface, giving an indicative SAR 2,650–5,250 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in An Nakhil?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in An Nakhil, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Dammam is one of the cities we serve directly; the inspection in An Nakhil is scheduled by team availability.
Book an inspection in An Nakhil
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy