Water Tank Insulation in An Nur, Dammam
Azl — delivered with a written warranty, to the Saudi Building Code
About An Nur
An Nur covers about 487 hectares in west Dammam, between King Saud Street to the south, Umar bin Al Khattab Street to the east and Abu Hadriyah Road to the west, with the industrial area to its north. Its flats and villas range from traditional to modern, and thermal and waterproofing work on roofs helps extend building life and cut repeat repairs. District guide
Why An Nur homes need water tank insulation
An Nur lies in west Dammam along King Saud Street and Umar bin Al Khattab Street, and is dominated by apartment buildings and villas. In apartment buildings one shared ground tank serves several flats, so a leak multiplies consumption and dampness in the adjacent basement and parking. High humidity affects bonding and curing, so application is scheduled in the least humid hours. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: check the concrete first, repair honeycombing and cracks, then line the tank with a system suited to its age and condition.
- Main roads
- • King Saud Street
- • Umar bin Al Khattab Street
- • Abu Hadriyah Road
- Common buildings
- • apartment buildings
- • villas
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in An Nur
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical An Nur sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 15 m³ (≈ 29 m² internal) | 1,750 – 3,550 | Written, by work type |
| Medium tank | 28 m³ (≈ 44 m² internal) | 2,650 – 5,250 | Written, by work type |
| Large tank | 40 m³ (≈ 56 m² internal) | 3,350 – 6,700 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from An Nur residents
How much does tank insulation cost for an apartment building in An Nur, Dammam?
In An Nur, a tank of about 28 m³ has roughly 44 m² of internal surface, giving an indicative SAR 2,650–5,250 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in An Nur?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in An Nur, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Dammam is one of the cities we serve directly; the inspection in An Nur is scheduled by team availability.
Book an inspection in An Nur
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy