Water Tank Insulation in Ash Shati, Jeddah
Azl — delivered with a written warranty, to the Saudi Building Code
About Ash Shati
Ash Shati runs along the Red Sea shore west of King Abdulaziz Road in north Jeddah, mixing luxury villas, residential towers and waterfront commercial and leisure facilities. Being right on the sea means high humidity and salt spray that wear down roofs and facades, so buildings here need salt-resistant waterproofing and thermal insulation that limits condensation inside walls and ceilings. District guide
Why Ash Shati homes need water tank insulation
Ash Shati lies in north Jeddah along King Abdulaziz Road and Prince Mohammed bin Abdulaziz Street, and is dominated by villas, apartment buildings, towers and high-rise buildings and shops and commercial buildings. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Being near the sea means humidity and salt that speed rebar corrosion and affect curing, so surface moisture and dew point are checked before any application. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: define the use (residential or commercial) and choose a lining suited to operating hours, with a fill test before re-commissioning.
- Main roads
- • King Abdulaziz Road
- • Prince Mohammed bin Abdulaziz Street
- • Corniche Road
- Nearby landmarks
- • Globe Roundabout
- Common buildings
- • villas
- • apartment buildings
- • towers and high-rise buildings
- • shops and commercial buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Ash Shati
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Ash Shati sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Ash Shati residents
How much does tank insulation cost for a villa in Ash Shati, Jeddah?
In Ash Shati, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Ash Shati?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue. Near Globe Roundabout we also plan access and working hours.
How long does tank insulation take in Ash Shati, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Jeddah is one of the cities we serve directly; the inspection in Ash Shati is scheduled by team availability.
Book an inspection in Ash Shati
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy