Water Tank Insulation in Al Firdaws, Jubail
Azl — delivered with a written warranty, to the Saudi Building Code
About Al Firdaws
Al Firdaws sits at the centre of Jubail Industrial City's districts, bounded by Al Farouq to the north across Road 4 and by Mosque Road to the south, crossed by Al Firdaws Road and close to Jubail University College. Villas in an orderly layout dominate; periodic roof waterproofing upkeep and added thermal insulation at renovation suit the hot, humid climate. District guide
Why Al Firdaws homes need water tank insulation
Al Firdaws in north Jubail is home to villas and apartment buildings, connected by Al Firdaws Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. The industrial character means loads, traffic and chemicals, so heavy-duty systems with chemical-resistant layers are chosen. High humidity affects bonding and curing, so application is scheduled in the least humid hours. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • Al Firdaws Road
- • Al Lulu Road
- • Highway 1
- Nearby landmarks
- • Jubail University College
- Common buildings
- • villas
- • apartment buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al Firdaws
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Al Firdaws sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Al Firdaws residents
How much does tank insulation cost for a villa in Al Firdaws, Jubail?
In Al Firdaws, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits tank insulation in Al Firdaws?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue. Near Jubail University College we also plan access and working hours.
How long does tank insulation take in Al Firdaws, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Jubail on request; once we receive your request from Al Firdaws we coordinate a date by team availability and confirm it first.
Book an inspection in Al Firdaws
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy