Water Tank Insulation in An Nahdah, Khafji
Azl — delivered with a written warranty, to the Saudi Building Code
About An Nahdah
An Nahdah is a busy Khafji district crossed by shop-lined King Khalid Street, with buildings that put shops on the ground floor and flats above. This pattern calls for sound roof waterproofing and separation between shop and flat services, and restaurants and food shops require regular pest programmes to stop cockroaches and rodents reaching the homes. District guide
Why An Nahdah homes need water tank insulation
Apartment buildings and shops and commercial buildings define An Nahdah in Khafji, beside King Khalid Street. In apartment buildings one shared ground tank serves several flats, so a leak multiplies consumption and dampness in the adjacent basement and parking. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. High humidity affects bonding and curing, so application is scheduled in the least humid hours. The fix: define the use (residential or commercial) and choose a lining suited to operating hours, with a fill test before re-commissioning.
- Main roads
- • King Khalid Street
- • Al Qayrawani Street
- Common buildings
- • apartment buildings
- • shops and commercial buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in An Nahdah
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical An Nahdah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 15 m³ (≈ 29 m² internal) | 1,750 – 3,550 | Written, by work type |
| Medium tank | 28 m³ (≈ 44 m² internal) | 2,650 – 5,250 | Written, by work type |
| Large tank | 40 m³ (≈ 56 m² internal) | 3,350 – 6,700 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from An Nahdah residents
How much does tank insulation cost for an apartment building in An Nahdah, Khafji?
In An Nahdah, a tank of about 28 m³ has roughly 44 m² of internal surface, giving an indicative SAR 2,650–5,250 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits tank insulation in An Nahdah?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in An Nahdah, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Khafji on request; once we receive your request from An Nahdah we coordinate a date by team availability and confirm it first.
Book an inspection in An Nahdah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy