Water Tank Insulation in An Nakheel, Khamis Mushait
Azl — delivered with a written warranty, to the Saudi Building Code
About An Nakheel
An Nakheel lies north of Prince Sultan Road, bounded by Ash Sharafiyah to the north, Al Bawadi to the east, Umm Sarrar to the west and Shakar to the south, with Al Fahd Central Market, a civil defence centre and schools. A fully serviced district of long-standing buildings, its villas and blocks need regular roof insulation checks and renewal as layers age under the plateau's strong sun. District guide
Why An Nakheel homes need water tank insulation
An Nakheel in west Khamis Mushait is home to villas and apartment buildings, connected by Prince Sultan Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. The altitude brings heavier rain and day–night temperature swings, so flexible materials and careful expansion joints are preferred. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. The fix: check the concrete first, repair honeycombing and cracks, then line the tank with a system suited to its age and condition.
- Main roads
- • Prince Sultan Road
- Nearby landmarks
- • Al Fahd Central Market
- Common buildings
- • villas
- • apartment buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in An Nakheel
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical An Nakheel sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from An Nakheel residents
How much does tank insulation cost for a villa in An Nakheel, Khamis Mushait?
In An Nakheel, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits tank insulation in An Nakheel?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue. Near Al Fahd Central Market we also plan access and working hours.
How long does tank insulation take in An Nakheel, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Khamis Mushait is one of the cities we serve directly; the inspection in An Nakheel is scheduled by team availability.
Book an inspection in An Nakheel
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy