Water Tank Insulation in Al Bandariyah, Al Khobar
Azl — delivered with a written warranty, to the Saudi Building Code
About Al Bandariyah
Al Bandariyah is a busy Khobar district a few minutes from the corniche and waterfront, next to Prince Turki Street and Sulaiman Al Habib Hospital, and filled with newer apartment projects and residential compounds. In multi-storey buildings the focus falls on roofs, service rooms and compound pools, plus treating shared drainage stacks, a common entry route for pests in apartment blocks. District guide
Why Al Bandariyah homes need water tank insulation
Apartment buildings, towers and high-rise buildings and shops and commercial buildings define Al Bandariyah in Al Khobar, beside Ibn Al Shihab Street. In apartment buildings one shared ground tank serves several flats, so a leak multiplies consumption and dampness in the adjacent basement and parking. High humidity affects bonding and curing, so application is scheduled in the least humid hours. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: define the use (residential or commercial) and choose a lining suited to operating hours, with a fill test before re-commissioning.
- Main roads
- • Ibn Al Shihab Street
- • Prince Turki Street
- Nearby landmarks
- • Dr. Sulaiman Al Habib Hospital
- Common buildings
- • apartment buildings
- • towers and high-rise buildings
- • shops and commercial buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al Bandariyah
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Al Bandariyah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 15 m³ (≈ 29 m² internal) | 1,750 – 3,550 | Written, by work type |
| Medium tank | 28 m³ (≈ 44 m² internal) | 2,650 – 5,250 | Written, by work type |
| Large tank | 40 m³ (≈ 56 m² internal) | 3,350 – 6,700 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Al Bandariyah residents
How much does tank insulation cost for an apartment building in Al Bandariyah, Al Khobar?
In Al Bandariyah, a tank of about 28 m³ has roughly 44 m² of internal surface, giving an indicative SAR 2,650–5,250 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Al Bandariyah?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue. Near Dr. Sulaiman Al Habib Hospital we also plan access and working hours.
How long does tank insulation take in Al Bandariyah, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Al Khobar is one of the cities we serve directly; the inspection in Al Bandariyah is scheduled by team availability.
Book an inspection in Al Bandariyah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy