Water Tank Insulation in Al-Ghurub, Riyadh
Azl — delivered with a written warranty, to the Saudi Building Code
About Al-Ghurub
Al-Ghurub is a new residential district in west Riyadh on Najm Al-Din Al-Ayyubi Road near Exit 27 of the ring road, and a fast-growing urban extension. Villas and apartments for young families are spreading, and construction there should ideally include roof and wall thermal insulation and bathroom waterproofing before handover. District guide
Why Al-Ghurub homes need water tank insulation
Al-Ghurub in west Riyadh is home to villas and apartment buildings, connected by Najm Al-Din Al-Ayyubi Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Many buildings in the district are under construction, and the best time to insulate is before tiling and backfill, with a flood test before covering. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • Najm Al-Din Al-Ayyubi Road
- Common buildings
- • villas
- • apartment buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al-Ghurub
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Al-Ghurub sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Al-Ghurub residents
How much does tank insulation cost for a villa in Al-Ghurub, Riyadh?
In Al-Ghurub, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Al-Ghurub?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Al-Ghurub, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Riyadh is one of the cities we serve directly; the inspection in Al-Ghurub is scheduled by team availability.
Book an inspection in Al-Ghurub
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy