Water Tank Insulation in King Abdullah, Riyadh
Azl — delivered with a written warranty, to the Saudi Building Code
About King Abdullah
King Abdullah District runs between King Abdullah Road to the north and Makkah Road to the south, with the Eastern Ring Road on the Ar Rawdah side, and hosts the Saqr Al-Jazeera Aviation Museum. It developed from the 1980s and is dominated by villas and flats, so many buildings need renewed roof waterproofing and treatment of damp in walls and basements. District guide
Why King Abdullah homes need water tank insulation
King Abdullah in central Riyadh is home to villas and apartment buildings, connected by Eastern Ring Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: check the concrete first, repair honeycombing and cracks, then line the tank with a system suited to its age and condition.
- Main roads
- • Eastern Ring Road
- • King Abdullah Road
- • Makkah Road
- Nearby landmarks
- • Saqr Al-Jazeera Aviation Museum
- Common buildings
- • villas
- • apartment buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in King Abdullah
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical King Abdullah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from King Abdullah residents
How much does tank insulation cost for a villa in King Abdullah, Riyadh?
In King Abdullah, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits tank insulation in King Abdullah?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue. Near Saqr Al-Jazeera Aviation Museum we also plan access and working hours.
How long does tank insulation take in King Abdullah, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Riyadh is one of the cities we serve directly; the inspection in King Abdullah is scheduled by team availability.
Book an inspection in King Abdullah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy