Water Tank Insulation in Al Rawdah, Riyadh
Azl — delivered with a written warranty, to the Saudi Building Code
About Al Rawdah
Al Rawdah emerged in the 1970s just east of the Eastern Ring Road and north of Khurais Road, covering about 8.7 square kilometres. It mixes rented villas with apartment blocks housing Saudi and expatriate families. Because many buildings are decades old, inspecting aged roof membranes and renewing waterproofing over tanks and rooftop annexes is a sensible priority before the rains. District guide
Why Al Rawdah homes need water tank insulation
Al Rawdah in east Riyadh is home to villas, apartment buildings and shops and commercial buildings, connected by Eastern Ring Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: check the concrete first, repair honeycombing and cracks, then line the tank with a system suited to its age and condition.
- Main roads
- • Eastern Ring Road
- • Khurais Road
- • Khalid bin Al-Walid Street
- • Abdulrahman Al-Ghafiqi Street
- Nearby landmarks
- • Al Rawdah Park
- • International Indian School, Riyadh
- Common buildings
- • villas
- • apartment buildings
- • shops and commercial buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al Rawdah
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Al Rawdah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Al Rawdah residents
How much does tank insulation cost for a villa in Al Rawdah, Riyadh?
In Al Rawdah, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Al Rawdah?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue. Near Al Rawdah Park we also plan access and working hours.
How long does tank insulation take in Al Rawdah, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Riyadh is one of the cities we serve directly; the inspection in Al Rawdah is scheduled by team availability.
Book an inspection in Al Rawdah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy