Water Tank Insulation in Ash Shifa, Riyadh
Azl — delivered with a written warranty, to the Saudi Building Code
About Ash Shifa
Ash Shifa lies in south Riyadh between Dirab Road to the north and Ibn Taymiyyah Road to the south, with Wadi Hanifah on its eastern side; planning began in the late 1960s. Older villas sit beside apartment blocks and shops, so re-waterproofing aged roofs, fixing tank and bathroom leaks, and upgrading wall insulation in pre-modern buildings are common jobs here. District guide
Why Ash Shifa homes need water tank insulation
Villas, apartment buildings and shops and commercial buildings define Ash Shifa in south Riyadh, beside Dirab Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Sitting near a wadi means storm and rain water may collect in places, so falls and drainage are reviewed before insulating. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: check the concrete first, repair honeycombing and cracks, then line the tank with a system suited to its age and condition.
- Main roads
- • Dirab Road
- • Ibn Taymiyyah Road
- • Al Khalil ibn Ahmad Road
- Nearby landmarks
- • Wadi Hanifah
- Common buildings
- • villas
- • apartment buildings
- • shops and commercial buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Ash Shifa
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Ash Shifa sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Ash Shifa residents
How much does tank insulation cost for a villa in Ash Shifa, Riyadh?
In Ash Shifa, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits tank insulation in Ash Shifa?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue. Near Wadi Hanifah we also plan access and working hours.
How long does tank insulation take in Ash Shifa, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Riyadh is one of the cities we serve directly; the inspection in Ash Shifa is scheduled by team availability.
Book an inspection in Ash Shifa
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy