Water Tank Insulation in Dahiyat Nimar, Riyadh
Azl — delivered with a written warranty, to the Saudi Building Code
About Dahiyat Nimar
Dahiyat Nimar is a new district at Riyadh's southwestern entrance under Nimar municipality, served by Dirab Road and Makkah Road and still being developed through plans such as Plan 3020. Residential plots and new villas are plentiful, making foundation and roof insulation during construction an essential step before finishing work is done. District guide
Why Dahiyat Nimar homes need water tank insulation
Villas, apartment buildings and shops and commercial buildings define Dahiyat Nimar in west Riyadh, beside Dirab Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Many buildings in the district are under construction, and the best time to insulate is before tiling and backfill, with a flood test before covering. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • Dirab Road
- • Makkah Road
- Nearby landmarks
- • King Abdullah International Gardens
- Common buildings
- • villas
- • apartment buildings
- • shops and commercial buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Dahiyat Nimar
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Dahiyat Nimar sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Dahiyat Nimar residents
How much does tank insulation cost for a villa in Dahiyat Nimar, Riyadh?
In Dahiyat Nimar, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits tank insulation in Dahiyat Nimar?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue. Near King Abdullah International Gardens we also plan access and working hours.
How long does tank insulation take in Dahiyat Nimar, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Riyadh is one of the cities we serve directly; the inspection in Dahiyat Nimar is scheduled by team availability.
Book an inspection in Dahiyat Nimar
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy