Water Tank Insulation in Shubra, Riyadh
Azl — delivered with a written warranty, to the Saudi Building Code
About Shubra
Shubra is a quiet residential district in west Riyadh between As-Suwaidi and Az-Zahrah, near the northern side of Wadi Nimar and served by the Hamza bin Abdulmuttalib metro station. Villas and mid-size apartment blocks prevail, and low-lying buildings near the valley call for foundation damp-proofing against rising moisture, along with roof insulation to cut heat gain. District guide
Why Shubra homes need water tank insulation
Villas and apartment buildings define Shubra in west Riyadh, beside Hamza bin Abdulmuttalib Street. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Sitting near a wadi means storm and rain water may collect in places, so falls and drainage are reviewed before insulating. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: check the concrete first, repair honeycombing and cracks, then line the tank with a system suited to its age and condition.
- Main roads
- • Hamza bin Abdulmuttalib Street
- • Southern Ring Road
- Nearby landmarks
- • Wadi Nimar
- Common buildings
- • villas
- • apartment buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Shubra
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Shubra sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Shubra residents
How much does tank insulation cost for a villa in Shubra, Riyadh?
In Shubra, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Shubra?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue. Near Wadi Nimar we also plan access and working hours.
How long does tank insulation take in Shubra, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Riyadh is one of the cities we serve directly; the inspection in Shubra is scheduled by team availability.
Book an inspection in Shubra
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy