Water Tank Insulation in Sultanah, Riyadh
Azl — delivered with a written warranty, to the Saudi Building Code
About Sultanah
Sultanah is a district of west Riyadh lying between Madinah Road to the north and As-Suwaidi General Road to the south, next to Al-Badiah, As-Suwaidi and Siyah. It combines housing with commercial and hospitality uses, so insulation work spans block roofs, shops and service rooms, plus acoustic and thermal treatment for facades facing busy roads. District guide
Why Sultanah homes need water tank insulation
Apartment buildings, shops and commercial buildings and villas define Sultanah in west Riyadh, beside Madinah Road. In apartment buildings one shared ground tank serves several flats, so a leak multiplies consumption and dampness in the adjacent basement and parking. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: define the use (residential or commercial) and choose a lining suited to operating hours, with a fill test before re-commissioning.
- Main roads
- • Madinah Road
- • As-Suwaidi General Road
- Common buildings
- • apartment buildings
- • shops and commercial buildings
- • villas
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Sultanah
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Sultanah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 15 m³ (≈ 29 m² internal) | 1,750 – 3,550 | Written, by work type |
| Medium tank | 28 m³ (≈ 44 m² internal) | 2,650 – 5,250 | Written, by work type |
| Large tank | 40 m³ (≈ 56 m² internal) | 3,350 – 6,700 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Sultanah residents
How much does tank insulation cost for an apartment building in Sultanah, Riyadh?
In Sultanah, a tank of about 28 m³ has roughly 44 m² of internal surface, giving an indicative SAR 2,650–5,250 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits tank insulation in Sultanah?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Sultanah, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Riyadh is one of the cities we serve directly; the inspection in Sultanah is scheduled by team availability.
Book an inspection in Sultanah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy